User`s guide
Functions for Master-Making
Printing Multiple Originals on One Sheet [2 Up] [Multi-Up Print]
77
2 Up Operation
1
Set the original and print paper.
Important!:
• Pay attention to the orientation of the original.
For “2 Up”, make sure to place the original as
the diagram demonstrates.
The same is true when using the ADF unit.
• Make sure to load paper as shown below (Por-
trait direction).
Note:
• With the optional ADF unit you can print two dif-
ferent originals side by side on a single sheet of
paper (2 in 1 printing). Set the two originals one
above the other.
• To print two copies of the same original side by
side on a single sheet of paper (2 Up printing),
set the original on the Glass Platen.
2
Touch [2 Up] on the Functions
Screen.
3
Make necessary settings.
Afterwards, perform the same operation as the
normal master-making and printing process.
The reproduction size needs to be set according
to the combination of the original size and printing
paper size.
Set the reproduction size by referring to the table
below.
4
Press the key.
Starts scanning of the original.
Paper output
direction
Dot Process
Contrast Adj
Tone Curve
2 Up
Basic Selections Functions Admin.
P
.
Program
Book Shadow
1/4
Job Memory
Multi-Up Print
Ready to Make Master Multi-Up
Original
A4 B5 A5 B6
Printing
Paper
A3 100% 116% 141% 163%
B4 87% 100% 123% 142%
A4 71% 82% 100% 116%
B5 61% 71% 87% 100%
Original
A6 B7 A7 B8
Printing
Paper
A3 200% --- --- ---
B4 173% 200% --- ---
A4 138% 163% 200% ---
B5 122% 141% 173% 200%
Original
Letter Statement
Printing
Paper
Ledger 100% 127%
Legal 77% 100%
Letter 66% 100%
Statement 50% 66%
PROOF
RESET
STOP
START