User`s guide

Functions for Master-Making
Printing Multiple Originals on One Sheet [2 Up] [Multi-Up Print]
76
 For Multi-Up Tickets:
“Multi-Up Tickets” cannot be used with multiple originals.
The number of images printed is determined by the width of the ticket.
Margin
Leave a margin of at least 5 mm (
3
/
16
") on the top edge of the Glass Platen. Allowing a proper margin is critical in well-
balanced Multi-Up positioning.
)p.20
Note:
• A margin on the top edge will remain regardless of enlargement or reduction settings.
Orientation of Print Paper
Always place paper in the Feed Tray as shown below.
Multi-Up Interval
“Multi-Up” performs scanning for the number of sheets.
The interval between the first scan and the second scan is called “Multi-Up Interval”.
Replace originals or change settings for the second scan during the “Multi-Up Interval”.
Note:
• Default “Multi-Up Interval” can be set on the Admin. screen. The factory default is 15 seconds.)p.171
Glass Platen
5mm (3/16")
(Top Side)
Set Position
Paper feeding direction