User`s guide

Basic Operations
Printing from a Paper Document or Book
47
When a proof copy is printed, the Print Basic
Screen will be displayed automatically.
Check the proof copy; e.g., print position and den-
sity.
If necessary, change print position and density.
• Print Position ()p.102)
• Print Density ()p.101)
• Interval ()p.106)
• Jump Wing Control ()p.107)
After adjustment, press the key to print a
proof copy.
Important!:
• When the machine has not been used for a long
period of time, the print quality may suffer due
to dry ink on the Print Drum (Cylinder).
Press the key to print proof copies sev-
eral times.
Note:
• You can also adjust the print position, the den-
sity, and the speed while print process is in
progress.
10
Enter the number of copies using
the Print Quantity Keys.
The specified number is displayed on the Print
Quantity Display.
Note:
• To change the number, press the key,
then re-enter the correct number.
11
Press the key.
The specified number of copies will be printed.
Note:
• Press the key to interrupt printing operation
currently underway.
• When printing from a computer, if the machine
is inactive for a certain period of time, it deter-
mines that the current job is completed, even if
the actual printing is still under way. If another
person accidentally initiates another job from
the computer, this will cause a new master to be
made, discarding the current one. To prevent
this from occurring, you may set a “Reserve
Period”. We recommend that you activate the
“Reservation” setting when printing leaflets, etc.
to prevent interruption.
)p.150
• Easily restore current settings by saving them
into memory. Saved settings can be retrieved
even when the key is pressed, or after turn-
ing the power off.
)p.142
12
Press the key when print job is
complete.
The setting returns to its default value.
Note:
• After printing is completed, the master remains
on the Print Drum (Cylinder). To protect confi-
dential documents from unauthorized duplica-
tion, use the “Confidential” feature to discard
the master after printing.
)p.149
• Even if you do not press the key, with the
passage of a certain amount of time (factory
default setting: 5 minutes), the setting will be
automatically reset.
)p.142
13
Remove the printed paper.
Open the Receiving Tray Paper Guides and
remove the paper.
For the machine equipped with the Auto-control
Stacking Tray, press the Receiving Tray Paper
Guides’ Opening Button and remove the paper.
PROOF
RESET
STOP
START