User`s guide

Basic Operations

Preparing to Print

Adding or Replacing Paper

When you add paper or replace with paper of a different size at the time of printing, press the Feed Tray Ascent/

Descent Button to lower the Paper Feed Tray.

• The Paper Feed Tray is lowered while you press and hold the button, and

when you release the button, the tray stops at that position.

• When the tray runs out of paper or you remove all paper, the tray is automati-

cally lowered to the bottom.

• After paper has been replenished, the Paper Feed Tray automatically rises

when you press the Key on the Control Panel.

Important!:

• When changing to a different paper size, remember to readjust the Receiving Tray Paper Guides and Paper Stop-

per.

• When changing to a different quality paper, remember to adjust the Paper Feed Pressure Adjustment Lever.

Note:

• When the Paper Feed Tray has been lowered to the bottom, if you press this button after paper has been replen-

ished, the Paper Feed Tray rises.

Closing the Paper Feed Tray

Before closing the Paper Feed Tray, remove the paper and widen the Feed Tray Paper Guides to the limits. Then

close the Paper Feed Tray.

Feed Tray Ascent/

Descent Button