User`s guide

Troubleshooting
When a Message Displays
261
!! The Data Storage Area
has Become Full !!
Clear Old Storage Data
(Symptom)
Insufficient free space on the Document
Storage Card DM-128CF.
(Action)
Check the stored data and delete
unnecessary jobs.
Touch [Cancel].
(Alternatively, press the key or the
key to clear.)
• For checking the storage memory
Touch [Storage Memory].
The file size is too large
to store on USB Flash Drive
Change the USB Flash Drive
or delete some files
to make spaces
(Symptom)
Insufficient free space on the USB Flash
Drive.
(Action)
Check the USB Flash Drive data and
delete unnecessary jobs.
Touch [Close].
(Alternatively, press the key or the
key to clear.)
• For checking the USB Flash Drive
data
Touch [USB Job List].
!!The Print Drum (Cylinder) Type
has been Changed!!
Select the Current
Print Drum (Cylinder) Type
(Symptom)
A different type of Print Drum (Cylinder)
has been installed.
(Action)
Select the type of Print Drum (Cylinder)
currently installed.
Alternatively, change back to the same
type of Print Drum (Cylinder) as before.
)p.231
• When changing a setting;
In the Confirm Print Drum (Cylinder)
Type screen, select the type of Print
Drum (Cylinder) currently installed
and touch [OK].
• When installing a different Print
Drum (Cylinder);
Pull out the Print Drum (Cylinder) and
replace with the same one as before.
When the Print Drum (Cylinder) is re-
installed, the Warning Message will clear.
!! Unmatched Paper Size !!
Interposal Paper is Smaller
than Printing Paper
Check Interposal Paper Size
(Symptom)
Interposal Papers are smaller than
paper size.
(Action)
Load Interposal Papers of appropriate
size in the tray.
Touch [Close].
(Alternatively, press the key or the
key to clear.)
!! Unmatched Size--
Current Page and
Printing Paper !!
Check Paper Size
(Symptom)
The original data sent from the computer
does not match the print paper size.
(Action)
Check the print paper size and change
paper or size as needed.
• When resuming the print job;
Touch [Continue].
(Alternatively, press the key to
print.)
• When stopping the print job;
Touch [Cancel].
(Alternatively, press the key or
the key to clear.)
Message Symptom/Action How to Clear a Pop-Up Message