User`s guide

Troubleshooting
When a Message Displays
258
Original size exceeds
limitation of layout
Specify the original size
(Symptom)
“Layout” is not available for the original
size.
(Action)
Specify the original size.
)p.82
• When changing the “Original Size”
setting;
Touch [Original Size].
• When resuming the print job;
Touch [Continue].
(Alternatively, press the key to print.)
• When stopping the print job;
Touch [Cancel].
(Alternatively, press the key or
the key to clear.)
Original Size Exceeds
Limitation of Multi-Up
Specify Original Size
(Symptom)
“Multi-Up” is not available for the original
size.
(Action)
Specify the original size.
)p.73
• When changing the “Original Size”
setting;
Touch [Original Size].
• When resuming the print job;
Touch [Continue].
(Alternatively, press the key to print.)
• When stopping the print job;
Touch [Cancel].
(Alternatively, press the key or
the key to clear.)
Original Undetected
Reset Original
(Symptom)
The machine failed to detect the original
document. The original document may
not be placed.
(Action)
Re-position the original.
• When resuming the print job;
Touch [Continue].
(Alternatively, press the key to print.)
• When stopping the print job;
Touch [Cancel].
(Alternatively, press the key or
the key to clear.)
Page Format is Larger
than Paper Size
!! Possible Ink Smudges
on Prints !!
(Symptom)
The printing paper is smaller than the
Master.
(Action)
Use a correct size printer paper.
• When printing from the machine;
Touch [Continue].
(You can also print by pressing the
key or the key.)
• When stopping the print job;
Touch [Cancel].
(You can also stop by pressing the
key or the key.)
Page Format is Larger
than Paper Size
!! Possible Ink Smudges
on Prints !!
(Continue->PROOF Key)
(Symptom)
The printing paper is smaller than the
Master.
(Action)
Use a correct size printer paper.
• To override the message and to print
with possible ink smears on the roller;
Press the key.
• When stopping the print job;
Touch [Cancel].
(You can also stop by pressing the
key or the key.)
Paper Size cannot be
Defined by Specified
Reproduction Size
Select Paper Size Manually
(Symptom)
The proper sized papers for the
specified reproduction size are not set.
(Action)
Select the Paper Tray.
• To select the Paper Tray;
Touch [Paper Select] or [Manual
Feed] to select the Paper Tray.
• When stopping the print job;
Touch [Cancel].
(You can also stop by pressing the
key or the key.)
Message Symptom/Action How to Clear a Pop-Up Message