User`s guide

Troubleshooting
When a Message Displays
257
!! No Auto Paper Size
Selection with Irregular
Size Original !!
Select Paper Size
and then Restart
(Cause 1)
Attempting to print an irregular-size
original using “Auto” in Link mode.
(Action)
Select the paper tray of the optional
Linked Printer.
(Cause 2)
A normal-size original has been set in
the wrong position.
(Action)
Lift the Platen Cover Pad up and set the
original correctly.
• To select the Feed Tray
Touch the button of the Feed Tray you
wish to use.
• To cancel scanning;
Touch [Cancel].
(Alternatively, press the key or
the key to clear.)
!! No Auto Reproduction
Size Selection with This
Combination of Original
and Printing Paper !!
Select Size Manually
(Symptom)
Auto Reproduction Size is less than
50% or more than 200%.
(Action)
Modify the reproduction size.
• When changing the “Size” setting;
Touch [Size Setting].
• When stopping the print job;
Touch [Cancel].
(Alternatively, press the key or
the key to clear.)
!! No Auto Reproduction
with This Original
and Printing Paper !!
Select Size Manually
(Symptom)
Auto reproduction is not available
because the size of the original could
not be detected.
(Action)
Set the reproduction size manually.
• When changing the “Size” setting;
Touch [Size Setting].
• When stopping the print job;
Touch [Cancel].
(Alternatively, press the key or
the key to clear.)
No Master on Print Drum (Cylinder)
Make a New Master
(Symptom)
You are attempting to print, but there is
no master on the Print Drum (Cylinder).
(Action)
Set the original and create a master.
Touch [Close].
Set the original and create a master.
Important!:
• Do not leave the Print Drum (Cylinder)
without a master. This dries out the
Print Drum (Cylinder) and causes
damage. You must either create a
master or perform a “Confidential”
operation to wrap a master around the
Print Drum (Cylinder).
!! Number of Copies
is set to “0”!!
Printing Operation will
Start on this Printer
(Symptom)
Number of print copies is set to “0”, yet
“Link-Free Volume” is set to ON when
Linked Printer is connected.
(Action)
Enter print quantity.
)p.174
• When printing from the machine;
Touch [Continue].
(Alternatively, press the key to print.)
• When stopping the print job;
Touch [Cancel].
(Alternatively, press the key or
the key to clear.)
Message Symptom/Action How to Clear a Pop-Up Message