User`s guide

Troubleshooting
When a Message Displays
255
Check the Original Size
The Original Size is larger
than Max. Printing Area
(Symptom)
As the original size is larger than the
maximum printing area, extra areas may
not be printed.
(Action)
Modify the reproduction size.
• To change the “Size” setting;
Touch [Size Setting].
• When resuming the print job;
Touch [Continue].
(Alternatively, press the key to
print.)
• When stopping the print job;
Touch [Cancel].
(Alternatively, press the key or
the key to clear.)
Check the Settings
The Sellected Reproduction
Ratio will not fit the
Max. Printing Area
(Symptom)
Reproduction size is too large for the
detected original size and exceeds the
maximum printing area.
(Action)
Modify the reproduction size, or set
printing paper of the appropriate size.
• When changing the “Size” setting;
Touch [Size Setting].
• When resuming the print job;
Touch [Continue].
(Alternatively, press the key to
print.)
• When stopping the print job;
Touch [Cancel].
(Alternatively, press the key or
the key to clear.)
Close Platen Cover
If original moves
you may not get
desired result
(Symptom)
The Platen Cover was opened during
the editing process of the RISO Editor
function.
(Action)
Close the Platen Cover gently.
When the Platen Cover is closed, the
warning message is erased.
Touch [Close].
(Alternatively, press the key or the
key to clear.)
Enter Print Quantity Over [N],
Programed Minimum Value
(Symptom)
You are trying to print fewer copies than
previously specified on “Minimum Print
Quantity”.
(Action)
Enter a larger number to print, or change
“Minimum Print Quantity” on the Admin.
screen.
)p.173
Touch [Close], and specify the number
of copies higher than the number
displayed on the message.
!! Images may not fit
in Frame of Paper with
This Reproduction Size !!
Check Current Selection
(Symptom)
Reproduction size for the detected
original size is larger than paper size.
(Action)
Modify the reproduction size.
)p.63
• When resuming the print job;
Touch [Continue].
(Alternatively, press the key to
print.)
• When stopping the print job;
Touch [Cancel].
(Alternatively, press the key or
the key to clear.)
Message Symptom/Action How to Clear a Pop-Up Message