User`s guide

Troubleshooting
When a Message Displays
253
F00-000:Warning Messages (in alphabetical order)
Message Symptom/Action How to Clear a Pop-Up Message
Acquiring Linked Printer
Configuration Data
Please Wait a Moment
(Symptom)
The machine system is retrieving Linked
Printer information. Link Mode printing is
disabled while the retrieval is underway.
(Action)
Start printing after the information has
been completely retrieved from Linked
Printer.
Or, print from the machine.
Touch [Close] to clear the Pop-Up
Message and return to the previous
screen.
• When printing from the machine;
Press the key or the key.
• When printing from a Linked
Printer;
Wait until the information has been
retrieved. (This may take several
minutes.)
Auto Page Size Selection
is Not Available for
Irregular-Size Original
Select Format Size to Store
and then Restart
(Cause 1)
Attempting to scan an irregular-size
original using “Auto” in scanning mode.
(Action)
Select the original size manually.
(Cause 2)
A normal-size original has been set in
the wrong position.
(Action)
Lift the Platen Cover Pad up and set the
original correctly.
• To specify the format for saving
Touch [Saving Format].
• To cancel scanning
Touch [Cancel].
(Alternatively, press the key or
the key to clear.)
!!Auto-Link Operation is
Not Available!!
Specified Linked Printer
may be in Error or
Turned OFF
(Symptom)
Linked Printer is sending an error signal.
Link Mode has been activated due to
low print volume since “Link-Free
Volume” is currently set to ON.
(Action)
After canceling the Linked Printer error,
print again.
Or, print after switching to another
Linked Printer or print from the machine.
)p.174
• When returning to the Master
Screen;.
Touch [Cancel].
(Alternatively, press the key or
the key to clear.)
• When changing to another
available Linked Printer;
Touch [Link Switch] and select
another Linked Printer on the Link Sw.
screen.
([Link Switch] will not display if no
other Linked Printer is available.)
)p.210