User`s guide

Troubleshooting
When a Message Displays
246
D00-000:Installation Error (in alphabetical order)
Message Possible Cause Action
Close Front Cover The Front Cover is open or
improperly closed.
Check for the magnet underneath the
Front Cover and firmly close.
Close Master Making Unit Cover The Master Making Unit Cover
is open or is improperly
installed.
Pull out the Master Making Unit, check
and firmly close its cover.
Close the ADF Cover Optional Auto Document
Feeder DX-1 cover is open or
incorrectly set.
Check the ADF Cover and close it firmly.
Install Ink Cartridge The Ink Cartridge is improperly
installed or is missing.
Properly install the Ink Cartridge.
)p.227
Master Making Unit has been
Unlocked
The Master Making Unit is
ready to be pulled out.
Pull out the Master Making Unit.
Print Drum has been Unlocked The Print Drum (Cylinder) is
ready to be pulled out.
Pull out the Print Drum (Cylinder).
Print Drum (Cylinder) Not Set in Place
Press Drum (Cylinder)
Release Button and Pull Out Print Drum (Cylinder)
after the Button Lights
The Print Drum (Cylinder) is
locked but not pushed in
properly.
Press the Print Drum (Cylinder) Release
Button . Remove the Print Drum (Cylinder)
after the button is lit and reinstall.
Rear Cover of Main Body is Off
Call Service
The machine rear cover is
removed.
Contact your dealer (or authorized service
representative).
Set Master Disposal Box in Place The Master Disposal Box is
improperly set or is missing.
Properly set the Master Disposal Box.
)p.229
Set Master in Place No master is installed. Install a Master Roll.
)p.224
Set Master Making Unit in Place The Master Making Unit is
missing or is improperly
installed.
Properly install the Master Making Unit.
)p.224
Set Print Drum (Cylinder) in Place The Print Drum (Cylinder) is
improperly set or is missing.
Properly install the Print Drum (Cylinder).
)p.231