User`s guide

Check for Remaining Amount of Consumables
222
Replacing Consumables
Check for Remaining Amount of Consumables
The machine checks and reports on remaining amount of ink, master, paper, as well as the space left in the master
disposal box.
Note:
• The report may not be displayed if detection fails.
• The reported amount is for reference only and may not be perfectly accurate.
• If the ink or master is depleted or the Master Disposal Box is full, a warning message is displayed and the machine
stops.
1
Touch [i Info] on the Basic Screen.
2
Check for remaining amount of con-
sumables.
When running low, be sure to restock supply.
•Master ()p.224)
•Ink ()p.227)
• Master Disposal (used master) ()p.229)
Display Details
 About the “My Counter” screen
When the “Management Level” in the User Manage-
ment is set to “High/Full Management”, touch [My
Counter] to display “My Counter” screen.
On the “My Counter” screen, you can confirm the
current user’s Limit C/C, M/C and Present C/C, M/C.
Limit C/C and M/C are set by the administrator. Con-
sult your administrator for details.
(A4)
READY
Black
Page
Basic Selections Functions Admin.
Contrast Size
Feed Tray
Idle Info
Ready to Make Master
D-Feed
Check
Multi-Up
Print
Line
A4
Auto
Consumables Amount
Drum Information
Disposal Box Space Date and Time
A3 Black
Disposal
11:25
Ink
Master Standard-T
Info
Close
My Counter
Nov23,10
Indicator/Message Description
The black bar indicates
the remaining amount.
Ex:
approximately 10% left
(Unknown),
---,
no display
Indicates that consumable
data is not available, is not
set, etc.
Close
My Counter
Limit C/C
U-1(G-1)
Present M/C
Limit M/C
Present C/C