User`s guide

When using a Linked Printer
Duplex Printing [Duplex]
220
6
Select Print functions as needed.
The following functions are available:
• Image Processing mode ()p.60)
• Scanning Contrast ()p.62)
•Size ()p.63)
• Paper Size ()p.180)
• Dot Process ()p.69)
• Memory ()p.142)
• Contrast Adj ()p.70)
• Tone Curve ()p.71)
• Book Shadow ()p.86)
• Preview ()p.94)
• Overlay ()p.199)
• Storage Memory ()p.197)
7
Enter the number of copies using the
Print Quantity Keys.
The number is displayed on the Print Quantity Dis-
play.
Note:
• To change the number, press the key,
then re-enter the correct number.
8
Press the key.
Subsequent procedures will be different depend-
ing on whether you place the original on the Glass
Platen or in the Auto Document Feeder DX-1. Fol-
low the processes below suitable for each case.
Important!:
• You cannot use both the Glass Platen and the
Auto Document Feeder DX-1 at the same time
to scan the original.
 Setting the original on the Glass
Platen
Place the first original document on the Glass
Platen, wait for the message “Duplex Process-
ing for Linked Printer” to disappear, then place
the second original and press the key.
Once data for both sides of the paper is trans-
mitted, the Linked Printer will print the specified
number of copies.
To print multiple Duplex Print copies, repeat
steps 5-8 of Duplex Printing.
Important!:
• Once the first original is scanned, the next orig-
inal must be placed within pre-determined
Duplex Interval period on the Admin. screen
()p.174). Failure to do so will result in the
Linked Printer printing one side only.
Note:
• Pressing the key without placing the sec-
ond original will also result in the Linked Printer
printing one side only.
• Setting adjustment can be made on the follow-
ing functions after placing the second original
and before its scan starts:
– Image Processing mode ()p.60)
– Scanning Density ()p.62)
–Size ()p.63)
– Dot Process ()p.69)
– Contrast Adj ()p.70)
– Tone Curve ()p.71)
 Using the Auto Document Feeder
DX-1
The top sheet is scanned first.
As each original page is scanned, the Linked
Printer prints specified number of copies.
A4
<Duplex Processing for Linked Printer>
Reverse-Page Scan->START / Simplex->STOP
Image Contrast Size Feed Tray
SelectionsBasic Functions Admin.
LBP1
MP
Idle
Auto
1 2
A4 A3 B4
Line
Book
Shadow
(A4)