User`s guide

When using a Linked Printer
Duplex Printing [Duplex]
217
 Using the Glass Platen
Place the first original document on the Glass
Platen, wait for the message “Duplex Process-
ing for Linked Printer” to disappear, then place
the second original and press the key.
Once data for both sides of the paper is trans-
mitted, the Linked Printer will print the specified
number of copies.
To print multiple Duplex Print copies, repeat
steps 5-8 of Duplex Printing.
Important!:
• Once the first original is scanned, the next orig-
inal must be placed within pre-determined
Duplex Interval period on the Admin. screen
()p.174). Failure to do so will result in the
Linked Printer printing one side only.
Note:
• Pressing the key without placing the sec-
ond original will also result in the Linked Printer
printing one side only.
• Setting adjustment can be made on the follow-
ing functions after placing the second original
and before its scan starts:
– Image Processing mode ()p.60)
– Scanning Contrast ()p.62)
–Size ()p.63)
– Dot Process ()p.69)
– Contrast Adj ()p.70)
– Tone Curve ()p.71)
 Using the ADF unit
The top sheet is scanned first.
As each original page is scanned, the Linked
Printer prints specified number of copies.
A4
<Duplex Processing for Linked Printer>
Reverse-Page Scan->START / Simplex->STOP
Image Contrast Size Feed Tray
SelectionsBasic Functions Admin.
LBP1
MP
Idle
Auto
1 2
A4 A3 B4
Line
Book
Shadow
(A4)