User`s guide

When using a Linked Printer
Setting up a Linked Printer [Link Properties]
205
Setting up a Linked Printer [Link Properties]
Linked Printer data must be entered in the machine in order to operate.
“Link Properties” are explained below.
See “Link Mode” ()p.174) for more information about Link Mode and other Admin. settings.
Important!:
• Make sure that the Linked Printer is physically connected to the machine. A Linked Printer cannot be recognized
by the machine unless physically connected.
• Enter information for each attached Linked Printer one device at a time.
• When there’s only one Linked Printer to the machine, set “Linked Printer” as “One-to-One”.
• Unless the Linked Printer data is entered in the machine, the device will not print, and its optional features will not
be available.
Setting up a Linked Printer
1
Touch [Link Mode] on the Admin.
screen.
2
Touch [Link Properties].
3
Select a tab for the Linked Printer.
Note:
• Up to 6 Linked Printers may be entered.
4
Select the button to enter informa-
tion.
Note:
• To display other functions that are not visible on
the screen, touch or .
20
_
15s
ON
PC Network
P .
All
Editor
Display
Default
System
Link Mode
Link Properties
Link-Free Volume
Duplex Interval
Online Auto-Link
Linked Printer
Admin.
1/2
20
_
15s
ON
PC Network
P .
All
Editor
Display
Default
System
Link Mode
Link Properties
Link-Free Volume
Duplex Interval
Online Auto-Link
Linked Printer
Admin.
1/2
Link Properties
Cancel OK
Printer Name
IP Address
Total Trays
Duplex
Printer Collate
Offset Pages
StandardTray
OFF
OFF
OFF
LBP1
Link Properties
Cancel OK
Printer Name
IP Address
Total Trays
Duplex
Printer Collate
Offset Pages
StandardTray
OFF
OFF
OFF
LBP2