User`s guide

Before Starting to Use
Originals
20
• If correction fluid or glue is used on an original, thoroughly dry it before placement.
• For an original patched with thick paper, the shade of the patched paper may also be printed.
Maximum Printing Areas and Margins
The maximum printing areas are as follows.
Important!:
• Even when paper of the maximum size (320 mm × 432 mm (12
10
/
16
" × 17")) or Ext.Paper (top-bottom length up
to 555 mm (21
14
/
16
")) is used, printing is performed within the maximum printing areas mentioned above.
• Regardless of the size of the original, the printing area is decided by the paper size set in the Paper Feed Tray. The
printing area is the printing paper size excluding the margins shown in the figure below. The original needs to be
prepared with advanced consideration for the margins.
Materials Not to Be Printed
Do not use the machine in any manner which violates the law or infringes on established copyrights, even when mak-
ing copies for personal use. Consult your local authorities for further details. In general, use discretion and common
sense.
Model Maximum Printing Area Usable Maximum Print Paper Size
RZ1090 291 mm × 425 mm (11
15
/
32
" × 16
23
/
32
")
320 mm × 432 mm (12
10
/
16
" × 17")
RZ1070 291 mm × 413 mm (11
15
/
32
" × 16
1
/
4
")
Top
Side