User`s guide

Advanced Features
Setting Up Direct Access Area and Selections Tab [DirectAccess Entry] [Selections Entry]
179
In the following steps, the registration on DirectAccess Entry and Selections Entry are explained at the same time.
1
Touch [DirectAccess Entry] or
[Selections Entry] on the Admin.
screen.
2
Select a mode tab to store new but-
tons.
3
Select a button to assign a function.
If the button has a function already assigned to it,
the newly selected function will overwrite the pre-
vious function.
4
Select a function to assign.
Note:
• Touch or to display more func-
tions if necessary.
• To remove a function accidentally assigned,
touch [No Entry].
• Functions already assigned are grayed out and
not available for selection.
• Some functions display only when optional
devices are installed.
5
Touch [OK].
Returns to DirectAccess Entry screen or Selections
Entry screen. The selected functions are added.
To add more functions, or to replace a button with
another function, repeat steps 2-5.
6
Touch [OK].
Returns to the Admin. screen. “Direct Access”
area or “Selections” screen is updated.
7
Touch .
Returns to the Master Making Basic Screen or
Print Basic Screen.
Rogo (RISO)
Multi-Up
Print
D-Feed
Check
No Entry No Entry
Frame1 Frame2
No Entry
Frame3
No Entry
Frame4
MasterMake Printing Scanning Link
Cancel OK
DirectAccess Entry
Multi-Up
Print
D-Feed
Check
Function List
Cancel OK
P .
No Entry
Renew Page
Idling Action
3/4
Confidential
Paper Feed Adj.
D-Feed Check
Ink Saving
Interval
Auto Page Renewal