User`s guide

Advanced Features
Showing Usage Status [Meter Display]
165
Showing Usage Status
[Meter Display]
The machine can record and display the following information:
A4/Letter and Under: Total number of copies A4/Letter-sized and smaller that have been printed.
Above A4/Letter: Total number of copies larger than A4/Letter that have been printed.
Total: The total number of copies printed by the machine.
A3/Ledger Master Count: Total number of A3/Ledger-sized masters that have been made.
A4W/LetterW Master Count: Total number of A4W/LetterW-sized masters that have been made.
Master Count: The total number of masters made by the machine.
Print Drum: The number of copies that have been printed with the currently installed Print Drum (Cylinder).
Job Count: Start and stop as needed.
For example, to keep track of the number of prints made in a day, set “Job Count” to 0 in the morning, and check the
counter at the end of the work day to get the count.
Note:
• When using more than one Print Drum (Cylinder), install the Print Drum (Cylinder) for which you need information
before displaying the Counter Display screen.
1
Touch [Meter Display] on the Func-
tions screen.
2
Review counts.
Note:
• Using the “Job Count”
1) Touch to set the counter to 0.
2) Touch [Close] to close the Meter Display
screen. Operate the machine as normal.
3) To display and review the Job Count, follow
step 1.
3
Touch [Close] to close the window.
Returns to the Functions screen.
Renew Page
Auto Page Renewal
4/4
P .
Basic Selections Functions Admin.
Ready to Make Master
Special Paper Ctrl
Job Separation
Scanning Side -ADF
Meter Display
Duplex(Link)
A4/Letter and Under
Above A4/Letter
Total
0
0
0
A3/Ledger Master Count
A4W/LetterW Master Count
Master Count Total
0
0
0
Print Drum Meter 0