User`s guide

Advanced Features
Print the original from the last page [Output reversal]
155
Print the original from the last page
[Output reversal]
By reversing the page order of the originals of several pages in length, print the originals from the last page.
Important!:
• To use this function, the optional Document Storage Card DM-128CF is required.
• While scanning the original, if there is no free memory space, the scanning stops to display a message. After can-
celing original scanning or arranging (clearing) the storage data, scan the original once again.
• You cannot use “Output Reversal” unless you set “CI Select” to “Internal CI” on the Admin. screen. See “Changing
Default Settings/CI Select” ()p.170).
Note:
“Output reversal” is not available in combination with the functions below.
• Program ([Multiple])
•Preview
•Overlay
• Storage Memory
1
Set the original and print paper.
Place the original on the Glass Platen or in the
optional ADF unit.
To place the original, see )p.43.
2
Touch [Output reversal] on the
Functions screen.
The button is inverted, and “Output Reversal” is
set to “ON”.
3
Configure print functions.
Set various functions as needed.
4
Press the key.
Scan the 1st original.
When the optional ADF unit is used, proceed to
step 6 after all the originals are scanned automat-
ically.
5
When the original has several pages,
replace the originals and repeat
steps 3 and 4.
Flow of original
In normal printing
In output reversal
Ready to scan data
Ready to scan data
Reverse
Reverse
180ppm
Page No. 1
Page N o . 1