User`s guide

Advanced Features
Reproducing the Master [Renew Page][Auto Page Renewal]
154
Using Auto Page Renewal
In order to use “Auto Page Renewal”, you must enable it in “Admin.” prior to use.
If “Auto Page Renewal” is activated and “Auto Page Renewal” is set to “ON”, “Auto Page Renewal” can be executed
during a print job.
Important!:
• If “Auto Page Renewal” is not activated in “Admin.”, “Auto Page Renewal” cannot be set to “ON”.
)p.173
• The “Auto Page Renewal” is set to “OFF” in the following instances.
– When printing with “Program”
– When the or the is pressed
– When attempting to process the next job with direct print
Note:
• The factory settings are such that a master is recreated every 1000 copies, with a setting to print 3 proofs. This set-
ting can be changed in “Admin.”. )p.173
Turning ON “Auto Page Renewal”
Touch [Auto Page Renewal] on the Func-
tions Screen.
“Auto Page Renewal” is activated.
When you print with these settings, “Auto Page
Renewal” will be executed after the specified number of
copies are printed.
Note:
• If [Auto Page Renewal] is grayed-out, go to “Admin.”
and turn “Auto Page Renewal” ON.
)p.173
4/4
P .
Basic Selections Functions Admin.
Select Print Quantity
Auto Page Renewal
Special Paper Ctrl
Internal
Job Separation
Scanning Side -ADF
Counter Display
Duplex(Link)