User`s guide

Functions for Printing
Paper Feed/Output Settings for Special Paper and Printing Types [Jump Wing Control] [Special Paper Ctrl]
114
Adjusting the Auto-control Stacking Tray
(when using the optional Auto-control Stacking Tray) [Receive Tray]
1
Touch [Special Paper Ctrl] on the
Functions Screen.
2
Touch [Receive Tray].
3
Touch the relevant adjustment but-
tons.
 Automatic adjustment of the
Receiving Tray Paper Guides/
Stopper
Touch [Auto] to adjust the position of the
Receiving Tray Paper Guides/Stopper auto-
matically to the standard positions for the
paper size.
 Detailed adjustments of the
Receiving Tray Paper Guides/
Stopper
Touch either one of the four “Narrower” or
“Wider” buttons to move the Receiving Tray
Paper Guides/Stopper in approximately
0.5 mm (
1
/
64
") increments.
• The adjustment value for the Receiving Tray
Paper Guides is displayed under “Side”,
while the Stopper adjustment is displayed
under “End”.
• Detailed adjustments will be effective after
paper size is set.
• Touch [Auto] to reset both “Side” and “End”
to the default value of 0 mm (0") and reacti-
vate automatic adjustment.
Note:
• The Receiving Tray Paper Guides (side) can be
widened by pressing the Receiving Tray Paper
Guides’ Opening Button during printing. )p.24
Buttons, components activated and
direction of movement
4/4
P .
Basic Selections Functions Admin.
Select Print Quantity
Auto Page Renewal
Special Paper Ctrl
Sorter
Job Separation
Scanning Side -ADF
Counter Display
Duplex(Link)
Close
Special Paper Ctrl
S-Tray Upper Limit
Paper-Feed Amount
Auto
Auto
Revise Entry/Call
Paper Feed Adj.
Air Blow
Separation Fan
ON
2
Paper Eject Adj
Side
End
0mm
0mm
Pre-suction Fan
Suction Fan
OFF
4
Receive Tray
Close
Special Paper Ctrl
S-Tray Upper Limit
Paper Feed Amount
Auto
Auto
ReviseEntry/Call
Paper Feed Adj.
Air Blow
Separation Fan
ON
2
Paper Eject Adj.
Side
End
0mm
0mm
Pre-suction Fan
Suction Fan
OFF
4
Reseive Tray
0mm
0mm
Receive Tray
End
Side
Auto
Close
Wider
Narrower Narrower
Wider
Button
Activated
component
Direction
[Narrower]
Stopper Towards the
machine
[Wider]
Outwards on
the Auto-control
Stacking Tray