User`s guide

Functions for Printing
Adjusting the Print Position [Print Position Adjustment]
102
Adjusting the Print Position
[Print Position Adjustment]
The print position on the paper can be adjusted.
Adjustment range Vertical direction (bottom ←→ top): ±15 mm (±
19
/
32
")
Horizontal direction (left ←→ right): ±10 mm (±
3
/
8
")
The positioning may be adjusted while Printing is in progress.
Note:
• After adjusting the print position, print a proof copy to check the result.
)p.104
• The numerical value formed by “Print Position Adjustment” is the target. Set the actual position by verifying and
adjusting the printed material.
Press the , , or key to
move up or down.
1) Key
Each press shifts the print position downward in steps of
about 0.5 mm (
1
/
64
").
2) Key
Press the key to move the print image about 0.5 mm
(
1
/
64
") to the left on the paper.
3) Key
Each press shifts the print position upward in steps of
about 0.5 mm (
1
/
64
").
4) Key/Original Position Indicator
Press to return to original position.
To restore the original Print Position during printing, hold
the button down for more than 1 second.
When the original Print Position is restored the indicator
will light up.
5) Key
Press the key to move the print image about 0.5 mm
(
1
/
64
") to the right on the paper.
The Print Basic Screen shows current vertical/horizon-
tal adjustment.
Bottom Top
Left Side
Right Side
Bottom Top
Left Side
Right Side
Paper
READY
Black
Basic Selections Functions Admin.
Idle
Renew Page
Info
Print Position
A4
D-Feed
Check
Silent
180ppm
3.0 mm
2.5 mm
Select Print Quantity