Specifications

Troubleshooting
Troubleshooting Tips
98
The indicator lights even when a
paper jam has not occurred.
Lifted paper was ejected at the time
of the second rotation of the Print
Drum.
Check the printed copies, and if the
top margin is less than 5 mm, slightly
lower the print position.
Because sunlight was projected to
the machine, the sensor did not
function correctly.
Use a curtain for example to shut out
sunlight or move the machine to a
place free from direct sunlight.
The machine repeats the master-
making process for each original.
“Collate Copies” or “Collate” was
selected for printer driver settings for
the received document data.
Cancel the current print job and
resend the document data without
“Collate Copies” or “Collate”
selected for the printer driver
settings.
The key blinks. Received data is waiting for output. Press the key to output the data.
To delete data waiting for output,
press the key.
“ ”appears on the Print
Quantity Display and the machine
does not start.
When the machine is in use, the
power was turned off.
Press the key.
Problem Cause Action
ORCH_GB.book Page 98 Thursday, February 19, 2004 2:08 PM