Specifications

Troubleshooting
Check & Error Display
87
When the indicator [Area *3] blinks
Check error locations and error numbers (Error Number Display) and take the following procedures.
If an error number is not shown, press the [] key.
Location
No.
Error No. Cause Action
c-04 The tray has run out of paper. Place paper on the Paper Feed Tray.
F-03
Custom-size paper has been placed
on the Paper Feed Tray at the time of
2-Up printing.
Custom-size paper does not allow 2-Up
printing.
Press the key and then place regular-
sized paper.
d-11
The Front Cover is open or has not
been completely closed.
Close the Front Cover completely.
d-01
The Print Drum has not been set or
has not been correctly set.
Set the Print Drum correctly.
)p.75
d-02
An inappropriate Print Drum has been
set.
Set an appropriate Print Drum.
)p.75
Important!:
• Use a Print Drum specific to the machine.
Set other drums can result in malfunction or
any other troubles.
d-03
The Ink Cartridge has not been set or
has not been correctly set.
Set an Ink Cartridge correctly.
)p.68
d-04
An inappropriate Ink Cartridge has
been set.
Set an Ink Cartridge specific to the machine.
)p.68
Important!:
• Use an Ink Cartridge specific to the
machine.
Using other Ink Cartridges can result in
malfunction or any other troubles.
The label on the Ink Cartridge outlet
surface has come off or surface is with
dirt.
The label on the Ink Cartridge outlet surface
contains information needed for printing. If the
machine cannot read the information, it does
not operate.
Set an Ink Cartridge that is specific to the
machine and that is with label attachment and
free from dirt.
ORCH_GB.book Page 87 Thursday, February 19, 2004 2:08 PM