Specifications

Replacing and Disposing Consumables

Replacing the Master Roll

When the entire Master Roll is consumed, the Master Replacement indicator lights. Replace with a new Master Roll.

Important!:

• For the Master Roll, it is recommended to use the products specified by RISO.

1 Open the Front Cover.

2 Check the indicator of the Master

Making Unit Release button is on.

If the indicator is off, press the Master Making Unit

Release button to turn on its indicator.

:Master Making Unit Release button

Note:

• With the Print Drum pulled out, you cannot pull

out the Master Making Unit. Place the Print

Drum into position, and then press the Master

Making Unit Release button.

)p.75

3 Pull out the Master Making Unit.

Grasp the Master Making Unit Handle and pull out

the Master Making Unit until it stops.

4 Open the Master Making Unit Cover.

Grasp the Master Making Unit Cover Lever and

open the Master Making Unit Cover.

5 Open the Master Roll Holder.

ORCH_GB.book Page 70 Thursday, February 19, 2004 2:08 PM