Specifications

Advanced Features

Customising the Initial Settings [Custom Setting Mode]

Changing Procedure

1 Press the key to turn on its indi-

cator.

Note:

• To clear the mode, press the key again to

turn off its indicator.

2 Enter an item number to be changed,

using the Print Quantity keys.

The Print Quantity Display shows the current

parameter setting for the selected item number.

Note:

• For items No. 70 through 72, the operation pro-

cedures differ.

– Item No.70 and 71:)p.65

– Item No.72:)p.67

• To restore the initial settings for the Custom

Setting mode, enter “99” and press the [+] key,

and then press the key.

3 Press the [ ] key.

Pressing this key allows you to select a parameter

number.

The currently set parameter number blinks.

4 Enter a parameter number using the

Print Quantity keys.

If there are more than one item to be changed, press

the

[+]

key, and then repeat steps 2 through 4.

ORCH_GB.book Page 63 Thursday, February 19, 2004 2:08 PM