Specifications

Advanced Features
Customising the Initial Settings [Custom Setting Mode]
61
15 Beep sound
Specify how an alarm should sound
when keys are operated or errors occur.
• Level 2
A beep sounds at all preset
occasions; for example at the time
of key operations and event
generation/end.
• Level 1
A beep sounds only at the time of
error occurrence, setting
completion, pulling-out enabled,
and 2-Up printing interval time.
• Level 0
A beep does not sound at any
occasions.
Level 2
Level 1 Level 0
16 Reservation Period
Specify the time for restricting
document data output from a computer
when the machine is not operated.
OFF 15
seconds
30
seconds
60
seconds
17 Semi-Auto(ADF unit) (available only
with the optional ADF unit)
With “ON” selected, if an original
exists in the ADF unit after printing,
the next master-making process is
executed followed by proof copy, and
then machine operation is stopped.
Important!:
• With “ON” selected for Auto-Process,
you cannot select “ON” for Semi-Auto.
OFF ON
18 Job Separation
Select “ON” when using an Job
Separator (option).
OFF
ON
19 Tray paper size for a Linked Printer
(for RZ2XX, unavailable)
Change the initial setting for the paper
size to be output from a Linked Printer
(option).
A3 B4 A4
B5
20 Print Quantity restoration setting
Set the restoration setting for Print Quantity.
Select “ON” when you want to restore the
Print Quantity after printing is finished.
OFF ON
21 2-UP printing restoration setting
Set the automatic restoration setting
for 2-Up printing.
Select “ON” when you want to restore the
2-Up printing after 2-Up printing is finished.
OFF ON
Item
No.
Changeable Items
Parameter Selection
0 1 2 3 4 5
ORCH_GB.book Page 61 Thursday, February 19, 2004 2:08 PM