Specifications

Advanced Features
Customising the Initial Settings [Custom Setting Mode]
59
Customising the Initial Settings
[Custom Setting Mode]
You can change the initial settings that are restored when the power is turned on or when the key is pressed.
Changed settings are effective until they are changed again.
The changeable items and their descriptions are as follows:
:Initial setting (factory default)
Item
No.
Changeable Items
Parameter Selection
0 1 2 3 4 5
01 Print speed
Change the initial setting for the print
speed.
123
45
02 Print density (for RZ2XX, unavailable)
Change the initial setting for the print
density.
123
45
03 Auto-Process
Change the initial setting for the Auto-
Process.
OFF
ON
04 Scanning level
Change the initial setting
for the scanning level.
RZ3XX12345Auto
RZ2XX 1 2 3 45
05 Image Processing mode
Change the initial setting for the
Image Processing mode.
Important!:
• With the Photo mode or Duo mode
selected, you cannot select “Auto”
for the scanning level.
Line
Photo Duo
06 Size of originals for Book
shadow editing
Change the initial setting
for the size of originals for
Book shadow editing.
RZ3XX Paper
A3 B4 A4 B5
RZ2XX Paper
B4 A4 B5
07 Width of central shadow for Book
shadow editing
Change the initial setting for the width
of central shadow to be erased in the
Book shadow editing.
20mm
30mm 40mm 50mm 80mm
08
Auto idling time (for RZ2XX, unavailable)
Change the initial setting for the auto
idling time.
None 6 hours 12 hours
09 2-Up printing interval time
Change the initial setting for the 2-Up
printing interval time.
None 15
seconds
30
seconds
ORCH_GB.book Page 59 Thursday, February 19, 2004 2:08 PM