Specifications

Advanced Features

Printing with a Linked Printer (Option) (For RZ2XX, unavailable)

Printing with a Linked Printer

(Option) (For RZ2XX, unavailable)

With optional Linked Printer connected, an original is scanned by the machine but printed out by the Linked Printer.

Important!:

• When connecting a Linked Printer, consult your dealer.

• Using a Linked Printer needs some settings to be made.)p.65

• Only a single preset size of paper can be output from the tray of a Linked Printer. The Custom Setting mode allows

you to change the initial setting for this paper size. (Initial setting: A4))p.59

1 Check that the Linked Printer has

been correctly connected and that

the power switches of the machine

and the Linked Printer are ON.

2 Press the [ ] key.

The output destination is switched to the Linked

Printer and “L” is displayed at the left end of the

Print Quantity Display.

Note:

• To switch back to master-making and printing

operations with the machine, press the []

key again.

• When you press the [] key immediately after

the power switch is on, “L” may not appear on

the display. In that case, please wait for a while.

When “L” appears, move on to the next step.

3 Place an original.

z When placing on the Platen Glass

Open the Platen Cover and place the original

face down. Align the centre of the original with

the mark on the left-hand of the glass.

After placing the original, slowly close the

Platen Cover.

z When placing in the ADF unit (option)

Place originals face down, and then adjust the

Original Guides to the width of the originals.

Note:

• You can place up to about 50 sheets of orig-

inals in the ADF unit.

ORCH_GB.book Page 57 Thursday, February 19, 2004 2:08 PM