Specifications

Setting up for Printing
Adjusting the Print Position [Print Position Adjustment]
48
Adjusting the Print Position
[Print Position Adjustment]
Use the Vertical Print Position Adjustment keys to adjust the print position in the vertical direction; and use the Hor-
izontal Print Position Adjustment Dial to adjust it in the horizontal direction.
Adjustment range Vertical direction: ±15mm Horizontal direction: ±10mm
Important!:
• After adjusting the print position, perform proof copies to check the new print position.
)p.46
Adjusting the Vertical Position
Press the / keys to adjust the vertical
position.
key: Each press shifts the print position downward in
steps of about 0.5 mm.
key: Each press shifts the print position upward in
steps of about 0.5 mm.
key: Returns the print paper to the original posi-
tion.
: Shifts the print position downward.
: Shifts the print position upward.
Adjusting the Horizontal Position
1 Press the Feed Tray Descent Button
to lower the Paper Feed Tray.
2 Turn the Horizontal Print Position
Adjustment Dial beside the Paper
Feed Tray to adjust the horizontal
position.
Turn the dial upward to shift the print position to
the left, and turn the dial downward to shift it to the
right.
You can check the offset amount from the centre,
through the scale marks beside the Paper Feed
Tray.
on the scale indicates the centre.
ORCH_GB.book Page 48 Thursday, February 19, 2004 2:08 PM