Specifications

Setting up for Scanning Originals
Printing Originals Side-by-Side [2-Up Printing]
42
4 Start the master-making process.
z When placing originals on the Platen Glass
z Single-original printing
Press the key to start the first scan.
After the scan a interval time alarm sounds.
Before the alarm stops, press the key
again.
Important!:
• If you do not press the key within the
interval time, the half of the print will be
blank.
Note:
• If you select no interval time using the
Custom Setting mode, you can complete
2-Up printing by pressing the key only
once.
)p.59
z Two-original printing
Press the key to start the first scan.
After the scan a interval time alarm sounds.
Before the alarm stops, place the second
original, make various settings (if neces-
sary), and then press the key again.
Important!:
• If you do not press the key within the
interval time, the half of the print will be
blank.
z When placing originals in the ADF unit (option)
z Single-original printing
Press the key to start the first scan.
Place the second original within the interval
time. Scan of the second original is auto-
matically started.
Note:
• If you have selected no interval time using
the Custom Setting mode, you cannot
perform single-original printing with the
ADF unit.
z Two-original printing
Place two piled originals in the tray. Press
the key to sequentially execute 2-Up
printing using the two originals. If you want
to make different settings for each original,
place only the first original, and then press
the key. Within the interval time, change
the settings, and then place the second
original. Scan of the second original is auto-
matically started.
5 Enter the number of copies to be
printed, using the Print Quantity keys.
The specified number is shown on the Print Quan-
tity Display.
6 Press the key.
2-Up printed copies are output.
Note:
• If there exists an original in the ADF unit when
“Auto-Process” is “ON” for two-original printing,
2-Up printing is sequentially executed.
ORCH_GB.book Page 42 Thursday, February 19, 2004 2:08 PM