Specifications

Setting up for Scanning Originals
Reproducing Bound Documents [Book Shadow Edit]
38
Reproducing Bound Documents
[Book Shadow Edit]
This function erases the binding “spine” shadow when printing from such bound originals with facing pages as mag-
azines and books.
Important!:
• The initial settings have been made for the size of originals whose masters can be made and the width of shadow
to be erased.
(Initial settings: for the size of originals, size of paper placed on the Paper Feed Tray; for width of shadow to be
erased, 20 mm)
The Custom Setting mode allows you to change the initial settings for the size of originals and the width of shadow
to be erased. )p.59
• If using the Custom Setting mode you have selected “Paper” as the Size of originals for Book shadow editing, use
regular-sized paper. If you place custom-size paper, shadow erasure is not correctly performed.
• The outside of the set original size is not scanned and used for the master-making process.
1 Place a book (or a magazine) on the
Platen Glass.
Make sure to place the original in the orientation
below:
The shadow within the dotted box is erased.
2 Press the key to turn on its indicator.
Note:
• To clear the setting, press the key again to
turn off its indicator.
ORCH_GB.book Page 38 Thursday, February 19, 2004 2:08 PM