Specifications

Basic Operations
Basic Operations
28
• If using the Custom Setting mode you select
ON for Semi-Auto, the next master-making
is automatically started and then the
machine will stop when the ADF unit con-
tains originals.
)p.59
4 Make necessary settings.
Make various settings including image processing
mode selection.
)p.32∼p.44
5 Enter the number of copies to be
printed, using the Print Quantity
keys.
The specified number is shown on the Print Quan-
tity Display.
Note:
• If you enter an incorrect number, press the [C]
key, and then enter the correct number.
• If “L” appears at the left end of the Print Quantity
Display, printed copies are output from a Linked
Printer (option).
Go to step 7.
)p.57
• In order to make a master using the machine
when “L” is in display, press the [C] key to reset
the Print Quantity Display to zero, and then
press the key. The master-making process
is started.
Check the sample copy result, enter the
number of copies to be printed, and then press
the key again.
6 Press the key.
The original is scanned, and a master is made.
After a master has been made, a sample copy is
printed.
Check the sample copy result; e.g., print position
and density.
Note:
• You can change the settings for print position
and density. After changing the settings, press
, and then check the proof copy result.
)p.46∼p.50
7 Press the key again.
The specified number of copies is printed.
Note:
• You can change the print speed using the Print
Speed Adjustment keys.
)p.50
• If printing is stopped halfway, check the display.
)p.82∼p.92
8 Press the key.
After printing has been finished, return the set-
tings to the initial settings.
ORCH_GB.book Page 28 Thursday, February 19, 2004 2:08 PM