Specifications

Before Starting to Use
Connection with a Computer (Option)
14
Connection with a Computer (Option)
With an optional interface board (Printer Control Board RISORINC3N) installed, you can directly send data from a
connected computer to the machine as an original for printing. Because digital data itself is used for making a master,
the finish of prints becomes outstanding.
Important!:
• Before making the connections, turn off both the machine and computer.
• The maximum allowable voltage for parallel connector input and output is 5 V.
Connection Method Option Needed Cable
one-to-one connection
with a Windows PC
Printer Control Board
RISORINC3N
Parallel printer cable IEEE1284 conformed
One-to-one connection
with a Macintosh
(Windows PC also
acceptable)
Printer Control Board
RISORINC3N
RISORINC-NET
Ethernet cable (cross) Shielded cable that
supports 10BASE-T or
100BASE-TX
Network connections Printer Control Board
RISORINC3N
RISORINC-NET
Ethernet cable (straight)
ORCH_GB.book Page 14 Thursday, February 19, 2004 2:08 PM