cover2-1.fm Page 1 Friday, February 27, 2004 1:21 PM Riso shall not be responsible for any damage or expense that might result from the use of this manual. As we are constantly improving our products, the machine may differ in some respects from the illustrations used in this manual. Riso shall not be liable for any direct, incidental, or consequential damages of any nature, or losses or expenses resulting from the use of this product or included manuals.
ORCH_GB.book Page 2 Thursday, February 19, 2004 2:08 PM Contents Welcome to the RISO RZ Series Model .............................................................................. 5 Getting Acquainted 6 Parts and Components........................................................................................................ 6 Control Panels .....................................................................................................................
ORCH_GB.book Page 3 Thursday, February 19, 2004 2:08 PM Contents Setting up for Scanning Originals 32 Selecting the Image Processing Mode [Line, Photo, Duo] ................................................ 32 Scanning Originals Written with Pencils [Pencil] (For RZ2XX, unavailable)...................... 33 Processing Photos with Dot Screening [Dot Process] (For RZ2XX, unavailable) ............. 34 Enlarging and Reducing Originals [Enlargement/Reduction] ............................................
ORCH_GB.book Page 4 Thursday, February 19, 2004 2:08 PM Contents Replacing and Disposing Consumables 68 Replacing the Ink Cartridge ............................................................................................... 68 Replacing the Master Roll ................................................................................................. 70 Emptying the Master Disposal Box....................................................................................
ORCH_GB.book Page 5 Thursday, February 19, 2004 2:08 PM Welcome to the RISO RZ Series Model Thank you for purchasing this printing machine that produces clear prints with easy key operations. Besides many useful functions as a printer, the machine provides you with various conveniences such as Progressive Arrow indicators that show the progress of the master-making and printing processes and the Receiving Tray Paper Guide that allow you to easily pick up printed copies.
ORCH_GB.
ORCH_GB.book Page 7 Thursday, February 19, 2004 2:08 PM Getting Acquainted 1) Platen Cover 2) Sub Control Panel ()p.10) 3) Platen Glass ()p.79) Place an original face down. 4) Main Display ()p.82) 5) Main Control Panel ()p.8) 6) Master Disposal Box ()p.73) Holds discarded masters. 7) Paper Feed Pressure Adjustment Lever ()p.19) Adjusts the paper feed pressure according to paper in use. 8) Feed Tray Descent Button ()p.20) Lowers the Paper Feed Tray when replacing or adding paper.
ORCH_GB.book Page 8 Thursday, February 19, 2004 2:08 PM Getting Acquainted Control Panels Main Control Panel 1) Check & Error Display ()p.82) 9) Print Speed Adjustment Keys/Indicator ()p.50) Indicates error locations and status. Select the print speed from five levels. The indicator above the keys shows the current speed level. 2) indicator 3) Print Quantity Display (Error number display) Shows the number of printed copies, numeric values entered for various settings, and error numbers.
ORCH_GB.book Page 9 Thursday, February 19, 2004 2:08 PM Getting Acquainted 16) + Key Use when setting up for programmed printing or when changing the initial settings. 17) × Key Use when setting up for programmed printing. 18) Start Key Starts master-making or printing process or executes specified operations. The key is lighted only when the key is active. 19) Proof Key ()p.46) Use when you want to check print result after adjusting the print position, for example.
ORCH_GB.book Page 10 Thursday, February 19, 2004 2:08 PM Getting Acquainted Sub Control Panel 1) Free Reproduction Size Display ()p.32) Shows the enlargement/reduction ratio specified using the zoom function. Each time you press the key, the Image Processing mode is changed. When the Line mode is selected, lights. When the photo mode is selected, lights. When the Duo(text/photo) mode is selected, both and light. 2) Reproduction Size Selection Key ()p.
ORCH_GB.book Page 11 Thursday, February 19, 2004 2:08 PM Getting Acquainted 12) Interface Key/Indicator ()p.30) When connected with a computer (optional kit needed), switches between line connection and disconnection. When the line is in connection, the indicator above the key lights. 13) Custom Key/Indicator ()p.59) Use when changing the initial settings. When activated, the indicator above the key lights. 14) Idling Key/Indicator ()p.55) Sets up for idling.
ORCH_GB.book Page 12 Thursday, February 19, 2004 2:08 PM Before Starting to Use Safety Guide - Installation This section describes the precautions to be observed when installing the machine. Read this section before installing the machine. Note: • Your dealer will help you to determine a proper location for the machine at the time of delivery. Installation AWARNING: • Place the machine on the dedicated stand for this model or on a flat and stable surface (maximum of 10 mm differential allowed).
ORCH_GB.book Page 13 Thursday, February 19, 2004 2:08 PM Before Starting to Use Power connection AWARNING: • Do not overload the wall socket or extension cord, nor damage the power cord by placing heavy objects on it or pulling or bending it. This can result in fire or electric shock. • Do not pull the power cord but hold the plug itself when unplugging it. This can damage the cord and result in fire or electric shock. • Do not plug or unplug the power cord if your hands are wet.
ORCH_GB.book Page 14 Thursday, February 19, 2004 2:08 PM Before Starting to Use Connection with a Computer (Option) With an optional interface board (Printer Control Board RISORINC3N) installed, you can directly send data from a connected computer to the machine as an original for printing. Because digital data itself is used for making a master, the finish of prints becomes outstanding. Important!: • Before making the connections, turn off both the machine and computer.
ORCH_GB.book Page 15 Thursday, February 19, 2004 2:08 PM Before Starting to Use Paper Recommendations Size and Weight Restrictions The table shows the specifications of the usable print paper.
ORCH_GB.book Page 16 Thursday, February 19, 2004 2:08 PM Before Starting to Use Tips for Better Paper Feeding To prevent paper jams and misfeeds, follow the directions below: • When using standard or light-weight paper, set the Paper Feed Pressure Adjustment Lever to “ ”. Then set the Paper Ejection Wing Adjustment Dial (for RZ2XX, unavailable) according to the paper size and open all four Paper Arrangers (for RZ2XX, unavailable). For RZ2XX, set the corrugators. )p.
ORCH_GB.book Page 17 Thursday, February 19, 2004 2:08 PM Before Starting to Use Originals Size and Weight Restrictions Usable originals are as follows. Model RZ370/RZ300 Using the Platen Glass Size Weight 50 mm × 90 mm to 297 mm × 432 mm Max.
ORCH_GB.book Page 18 Thursday, February 19, 2004 2:08 PM Before Starting to Use Maximum Printing Areas and Margins The maximum printing areas are as follows. Model Maximum Printing Area RZ370 291mm×413mm RZ300 210mm×290mm RZ230 251mm×357mm RZ200 210mm×290mm Usable Maximum Print Paper Size 297mm×432mm Important!: • No matter which size of originals is printed, the margins indicated on the figure are required for the originals. Reduce the original if necessary to fit it inside of the margins.
ORCH_GB.book Page 19 Thursday, February 19, 2004 2:08 PM Before Starting to Use Preparing to Print Setting up the Paper Feed Tray 1 Open the Paper Feed Tray. 3 Select the paper feed pressure. Position the Paper Feed Pressure Adjustment Lever according to the finish of the paper. 2 Load paper. Place paper in the printing orientation, and slide the Feed Tray Paper Guides to fit to the sides of the paper. Then turn the right and left Feed Tray Paper Guide Levers to lock the guides.
ORCH_GB.book Page 20 Thursday, February 19, 2004 2:08 PM Before Starting to Use Adding or Replacing Paper When you add paper or replace with paper of a different size at the time of printing, press the Feed Tray Descent Button to lower the Paper Feed Tray. Pressing the button gently causes the tray to be lowered to the bottom. If you press and hold the button, the tray is lowered until you release the button.
ORCH_GB.book Page 21 Thursday, February 19, 2004 2:08 PM Before Starting to Use Setting up the Paper Receiving Tray 1 Open the Paper Receiving Tray. 2 Position the Receiving Tray Paper Guides. 3 Raise the Paper Stopper, and then slide it according to the length of paper. The subsequent steps differ depending on the models. Raise the guides, hold their lower parts, and then slide them according to the width of paper. • For RZ3XX, go to step 4. • For RZ2XX, go to step 6.
ORCH_GB.book Page 22 Thursday, February 19, 2004 2:08 PM Before Starting to Use z For ordinary paper with images lopsided on page Press to open the two Paper Arrangers on the more heavily printed side. z For thick paper Press to open the two Paper Arrangers (right and left) closer to the machine. 5 Adjust the Paper Ejection Wing. (For RZ2XX, unavailable) Adjust the Paper Ejection Wing Adjustment Dial according to the type and size of paper.
ORCH_GB.book Page 23 Thursday, February 19, 2004 2:08 PM Before Starting to Use 6 Set the corrugators. (for RZ3XX, unavailable) Lower the corrugators to the inside of the Paper Guides. Note: • Usually the corrugators should be lowered. When using thick paper, you need not lower the corrugators. Note: • When closing the Paper Receiving Tray, first slide the Paper Stopper to the edge of the tray and fold it inward.
ORCH_GB.book Page 24 Thursday, February 19, 2004 2:08 PM Basic Operations Safety Guide - Handling and Operation This section describes the precautions to be observed when handling the machine. Read this section before operating the machine. Operation Environment Important!: • Operate the machine under the following appropriate environment conditions.
ORCH_GB.book Page 25 Thursday, February 19, 2004 2:08 PM Basic Operations Consumables Important!: • For ink and master Roll, it is recommended to use the products specified by RISO. • Store consumables such as master Roll and ink properly. Do not store consumables in the following places: – Locations that are subject to direct sunlight or bright locations that are close to windows (If there is no other choice, curtain the window.
ORCH_GB.book Page 26 Thursday, February 19, 2004 2:08 PM Basic Operations Basic Process The machine presents two basic operational processes; master-making process and printing process. z Process for printing from a paper document or book A placed original is scanned by the scanner, and a generated master is rolled around the Print Drum. After a while, sample copy is performed. After checking the print result, enter the number of copies to be printed and start printing.
ORCH_GB.book Page 27 Thursday, February 19, 2004 2:08 PM Basic Operations Basic Operations Printing from a Paper Document or Book 1 Set the power switch to turn the power on. (ON) to The power switch is located on the lower right side of the machine. 3 Place an original. z When placing on the Platen Glass Open the Platen Cover and place the original face down. Align the centre of the original with the mark on the left-hand side of the glass. After placing the original, slowly close the Platen Cover.
ORCH_GB.book Page 28 Thursday, February 19, 2004 2:08 PM Basic Operations • If using the Custom Setting mode you select ON for Semi-Auto, the next master-making is automatically started and then the machine will stop when the ADF unit contains originals. )p.59 4 6 Press the key. The original is scanned, and a master is made. After a master has been made, a sample copy is printed. Check the sample copy result; e.g., print position and density. Make necessary settings.
ORCH_GB.book Page 29 Thursday, February 19, 2004 2:08 PM Basic Operations 9 Remove the printed paper. Pull and open the Receiving Tray Paper Guides, and then remove the paper. Note: • For RZ2XX, lift the corrugators and pull the guides open. Tip: • Depending on the operation status of the machine, different Progressive Arrow sections light or blink.
ORCH_GB.book Page 30 Thursday, February 19, 2004 2:08 PM Basic Operations Printing with Data Generated by a Computer (Optional Kit Required) 1 Set the power switch to turn the power on. (ON) to The power switch is located on the lower right side of the machine. 4 Send document data from the computer. While the machine is receiving data, the indicator blinks. When receiving is completed, the master-making process is started.
ORCH_GB.
ORCH_GB.book Page 32 Thursday, February 19, 2004 2:08 PM Setting up for Scanning Originals Selecting the Image Processing Mode [Line, Photo, Duo] In order to make a quality master, select an appropriate mode depending on whether originals contain only Line(text) or photo or both of them. Press the key to select the Image Processing mode.
ORCH_GB.book Page 33 Thursday, February 19, 2004 2:08 PM Setting up for Scanning Originals Scanning Originals Written with Pencils [Pencil] (For RZ2XX, unavailable) This function allows clearer printing from such originals containing faint contents as those written with pencils. Press the key to turn on its indicator. Important!: • You cannot use the Pencil mode and Image Processing mode at the same time. • You cannot use the Pencil mode and Dot Process mode at the same time.
ORCH_GB.book Page 34 Thursday, February 19, 2004 2:08 PM Setting up for Scanning Originals Processing Photos with Dot Screening [Dot Process] (For RZ2XX, unavailable) This function processes photo originals with dot screening, resulting in clearer printing. You can select the dot screening pattern from two types. Press the key to select the type of a dot screening. Each time you press the key, the indicators light in the order; (COARSE)→ (FINE)→and then OFF.
ORCH_GB.book Page 35 Thursday, February 19, 2004 2:08 PM Setting up for Scanning Originals Enlarging and Reducing Originals [Enlargement/Reduction] You can enlarge or reduce originals when printing. Specify the enlargement/reduction ratio by selecting the standard ratios; or specify it in increments of 1%.
ORCH_GB.book Page 36 Thursday, February 19, 2004 2:08 PM Setting up for Scanning Originals Enlarging and Reducing with the Zoom Function [Zoom] (For RZ2XX, unavailable) Specify the enlargement/reduction ratio between 50% and 200% in increments of 1%. 1 Press the mode. key to select the Zoom The current enlargement/reduction ratio is shown on the display. 2 Press the / keys to select the enlargement/reduction ratio. The selected enlargement/reduction ratio is shown on the display.
ORCH_GB.book Page 37 Thursday, February 19, 2004 2:08 PM Setting up for Scanning Originals Scanning Originals Having Faint or Dark Contents [Scanning Level Adjustment] You can adjust the scanning level according to the density of text and images on originals. With “Auto” selected, the density of originals is pre-scanned and the optimum scanning level is automatically set (for RZ2XX, unavailable). Manual adjustment allows you to select from five levels.
ORCH_GB.book Page 38 Thursday, February 19, 2004 2:08 PM Setting up for Scanning Originals Reproducing Bound Documents [Book Shadow Edit] This function erases the binding “spine” shadow when printing from such bound originals with facing pages as magazines and books. Important!: • The initial settings have been made for the size of originals whose masters can be made and the width of shadow to be erased.
ORCH_GB.book Page 39 Thursday, February 19, 2004 2:08 PM Setting up for Scanning Originals Printing Originals Side-by-Side [2-Up Printing] The same or different originals can be printed side by side. This is called 2-Up printing. 2-Up printing allows you to place a single original or two different originals Important!: • With custom size paper placed, you cannot perform 2-Up printing. Quit 2-Up printing or place regular-sized paper.
ORCH_GB.book Page 40 Thursday, February 19, 2004 2:08 PM Setting up for Scanning Originals Restrictions on 2-Up Printing 2-Up printing restricts the sizes of paper to be used, paper orientations, and the enlargement/reduction ratios. Enlargement/reduction ratio The table shows enlargement/reduction ratios suitable for 2-Up printing.
ORCH_GB.book Page 41 Thursday, February 19, 2004 2:08 PM Setting up for Scanning Originals Note: • You can specify the enlargement/reduction ratio by selecting the standard ratios or specify it in increments of 1% using the Zoom function. )p.35 • Originals must have sufficient margins. Insufficient margins result in inappropriate page layout. )p.18 • Original margins are kept regardless of the enlargement/reduction ratio.
ORCH_GB.book Page 42 Thursday, February 19, 2004 2:08 PM Setting up for Scanning Originals 4 Start the master-making process. 5 z When placing originals on the Platen Glass Enter the number of copies to be printed, using the Print Quantity keys. The specified number is shown on the Print Quantity Display. z Single-original printing Press the key to start the first scan. After the scan a interval time alarm sounds. Before the alarm stops, press the key again.
ORCH_GB.book Page 43 Thursday, February 19, 2004 2:08 PM Setting up for Scanning Originals Automatic Printing [Auto-Process] With “Auto-Process” selected, enter the number of copies to be printed, and then press the ing and printing processes are automatically executed in a sequence. Press the tor. key. The master-mak- key to turn on its indica- Note: • When Auto-Process is selected and printing process is finished, Print Quantity Display returns to show the number of copies entered before printing.
ORCH_GB.book Page 44 Thursday, February 19, 2004 2:08 PM Setting up for Scanning Originals Saving Ink [Ink Saving] Setting the Ink Saving mode before making masters will allow the machine to save ink when printing. Because of ink consumption save processing, the print density will be lower than usual. Press the key to turn on its indicator. Important!: • When using this mode, you cannot adjust the scanning level. • You cannot adjust the print density when printing.
ORCH_GB.
ORCH_GB.book Page 46 Thursday, February 19, 2004 2:08 PM Setting up for Printing Producing Proof Copies [Proof] After adjusting the print position and density, you can produce proof copies to check the print quality. Press the key. Proof copy does not affect the number shown on the Print Quantity Display. Note: • By holding down the perform proof copy.
ORCH_GB.book Page 47 Thursday, February 19, 2004 2:08 PM Setting up for Printing Adjusting the Print Density [Print Density Adjustment] (For RZ2XX, unavailable) You can select the print density from five levels. Press the / keys under the print density. to adjust Each time you press the key, the print density is changed by one step. key: Decreases the print density. key: Increases the print density. :Lighter :Darker Important!: • With the Ink Saving mode selected, you cannot adjust the print density.
ORCH_GB.book Page 48 Thursday, February 19, 2004 2:08 PM Setting up for Printing Adjusting the Print Position [Print Position Adjustment] Use the Vertical Print Position Adjustment keys to adjust the print position in the vertical direction; and use the Horizontal Print Position Adjustment Dial to adjust it in the horizontal direction.
ORCH_GB.book Page 49 Thursday, February 19, 2004 2:08 PM Setting up for Printing Important!: • If you have adjusted the horizontal position, also adjust the Receiving Tray Paper Guides. • If you have adjusted the horizontal position, make sure to reset to the centre after printing is finished.
ORCH_GB.book Page 50 Thursday, February 19, 2004 2:08 PM Setting up for Printing Changing the Print Speed [Print Speed Adjustment] You can select the print speed from five levels; 60 copies per minute to 130 copies per minute. Press the / keys under the print speed. to select Each time you press the key, the print speed is changed by one step. key: Decreases the print speed. key: Increases the print speed.
ORCH_GB.
ORCH_GB.book Page 52 Thursday, February 19, 2004 2:08 PM Advanced Features Automatic Sorting into Groups [Programmed Printing] From a single sheet of original, this function prints and sorts into various groups having different number of copies per set and/or different number of sets. Note: • Up to five groups can be set up, with a maximum of 99 sets and a maximum of 9999 copies in each group. • The Job Separator (option) is useful for Programmed Printing.
ORCH_GB.book Page 53 Thursday, February 19, 2004 2:08 PM Advanced Features 1 3 Press the [P] key to turn on its indicator. Press the [ ] key. The set quantity entry mode is started. The print quantity entry mode is started. 4 Note: • To clear the mode, press the [P] key again to turn off its indicator. If the mode is quitted, the setting is cancelled. 2 Enter the number of set using the Print Quantity keys. Enter the number of copies to be printed, using the Print Quantity keys.
ORCH_GB.book Page 54 Thursday, February 19, 2004 2:08 PM Advanced Features 5 Press the [ ] key. 7 The machine then allows you to enter the number of copies for the second group. Make necessary settings. Make various settings as necessary. You can set the following functions: • • • • • • 8 Image Processing mode Pencil Dot Process Scanning level Enlargement/reduction ratio Auto-Process Press the key. A proof copy is printed.
ORCH_GB.book Page 55 Thursday, February 19, 2004 2:08 PM Advanced Features Idling Action [Idling] Idling action prevents the machine from printing the first several copies with faint ink after the Print Drum has been exchanged or the machine has not been used for an extended period of time. Idling action before the master-making process assures consistent print quality from the start. Press the key to turn on its indicator. When the indicator is on, place an original, and then press the key.
ORCH_GB.book Page 56 Thursday, February 19, 2004 2:08 PM Advanced Features Protecting Confidential Documents [Confidential Mode] After printing is complete, the master remains on the Print Drum and is ready for printing another set of copies. To protect confidential documents from unauthorized duplication, use the Confidential feature to discard the master after printing. 1 Confirm that printing has ended. 3 Printing should be completely finished. 2 Press the cator. key.
ORCH_GB.book Page 57 Thursday, February 19, 2004 2:08 PM Advanced Features Printing with a Linked Printer (Option) (For RZ2XX, unavailable) With optional Linked Printer connected, an original is scanned by the machine but printed out by the Linked Printer. Important!: • When connecting a Linked Printer, consult your dealer. • Using a Linked Printer needs some settings to be made.)p.65 • Only a single preset size of paper can be output from the tray of a Linked Printer.
ORCH_GB.book Page 58 Thursday, February 19, 2004 2:08 PM Advanced Features 4 Make necessary settings. You can set the following functions: • • • • 5 Image Processing mode Pencil Enlargement/Reduction ratio Scanning level Enter the number of copies to be printed, using the Print Quantity keys. The specified number is shown on the Print Quantity Display. Important!: • You cannot change the settings for the print speed, position, and density.
ORCH_GB.book Page 59 Thursday, February 19, 2004 2:08 PM Advanced Features Customising the Initial Settings [Custom Setting Mode] You can change the initial settings that are restored when the power is turned on or when the Changed settings are effective until they are changed again. The changeable items and their descriptions are as follows: :Initial setting (factory default) Item No. key is pressed.
ORCH_GB.book Page 60 Thursday, February 19, 2004 2:08 PM Advanced Features Item No. 10 Parameter Selection Changeable Items 0 Energy Saving mode When the machine is not used for a certain period of time, it is automatically turned off or placed into the sleep status. OFF 1 AutoSleep 2 3 4 5 AutoPower OFF • OFF The machine remains on until its power switch is turned off. • Auto-Sleep The machine is usually off but switched on when data is received. • Auto-Power OFF The machine is switched off.
ORCH_GB.book Page 61 Thursday, February 19, 2004 2:08 PM Advanced Features Item No. 15 Parameter Selection Changeable Items 0 Beep sound Level 2 Specify how an alarm should sound when keys are operated or errors occur. 1 Level 1 2 3 4 5 Level 0 • Level 2 A beep sounds at all preset occasions; for example at the time of key operations and event generation/end. • Level 1 A beep sounds only at the time of error occurrence, setting completion, pulling-out enabled, and 2-Up printing interval time.
ORCH_GB.book Page 62 Thursday, February 19, 2004 2:08 PM Advanced Features Item No. 62 Parameter Selection Changeable Items 0 1 2 3 4 5 30 Total Quantity Display The total number of copies printed with the machine is displayed. This number is displayed by two switching screens; a 3-digit number preceded by an under bar and a 4digit number. Example: For 1,234,567 copies, _123Î4567Î_123Î4567 Execute steps 1 through 3 in “Changing Procedure”.)p.
ORCH_GB.book Page 63 Thursday, February 19, 2004 2:08 PM Advanced Features Changing Procedure 1 Press the cator. key to turn on its indi- Note: • To clear the mode, press the turn off its indicator. 2 3 Press the [ ] key. Pressing this key allows you to select a parameter number. The currently set parameter number blinks. key again to Enter an item number to be changed, using the Print Quantity keys. 4 Enter a parameter number using the Print Quantity keys.
ORCH_GB.book Page 64 Thursday, February 19, 2004 2:08 PM Advanced Features 5 Press the tings. key to complete the set- The changed contents are programmed and the normal mode is restored.
ORCH_GB.book Page 65 Thursday, February 19, 2004 2:08 PM Advanced Features IP Address Setting (for RZ2XX, unavailable) When connecting a Linked Printer (option) or a computer, you need to set IP addresses on the machine and the Linked Printer. 1 Press the cator. key to turn on its indi- 3 Enter the first field using the Print Quantity keys. The entered number is shown on the Free Reproduction Size Display. Note: • To clear the operation, press the to turn off its indicator.
ORCH_GB.book Page 66 Thursday, February 19, 2004 2:08 PM Advanced Features 5 Repeat steps 3 and 4 to enter an IP address up to the fourth field. 6 Press the key. The IP address setting is completed.
ORCH_GB.book Page 67 Thursday, February 19, 2004 2:08 PM Advanced Features Setting the Link-free volume (for RZ2XX, unavailable) When entered print quantity is smaller than the specified Link-free volume (number of copies), a Linked Printer is automatically selected for printing. If entered print quantity is equal to or larger than the Link-free volume, the machine is selected for printing. 1 Press the cator. key to turn on its indi- 3 Enter a Link-free volume number using the Print Quantity keys.
ORCH_GB.book Page 68 Thursday, February 19, 2004 2:08 PM Replacing and Disposing Consumables Replacing the Ink Cartridge When the Ink Cartridge becomes empty, the Ink Replacement indicator lights. Replace with a new Ink Cartridge. Important!: • For the Ink Cartridge, it is recommended to use the products specified by RISO. • Before replacing the Ink Cartridge, turn the machine on. • Make sure to use the Ink Cartridge of the same colour ink.
ORCH_GB.book Page 69 Thursday, February 19, 2004 2:08 PM Replacing and Disposing Consumables 4 Insert the new Ink Cartridge. 6 Close the Front Cover. Align the arrow on the Ink Cartridge with the mark on the holder, and push the Ink Cartridge until it stops. 5 Note: • You can use the Ink Cartridge Cap Holder to keep the cap. Lock the Ink Cartridge. Turn the Ink Cartridge clockwise ( ) to lock it. • Dispose the empty Ink Cartridge according to the disposal rule of your local community. )p.
ORCH_GB.book Page 70 Thursday, February 19, 2004 2:08 PM Replacing and Disposing Consumables Replacing the Master Roll When the entire Master Roll is consumed, the Master Replacement indicator lights. Replace with a new Master Roll. Important!: • For the Master Roll, it is recommended to use the products specified by RISO. 1 Open the Front Cover. 3 Pull out the Master Making Unit. Grasp the Master Making Unit Handle and pull out the Master Making Unit until it stops.
ORCH_GB.book Page 71 Thursday, February 19, 2004 2:08 PM Replacing and Disposing Consumables 6 Remove the depleted Master Roll. 8 Close the Master Roll Holder. After closing the Master Roll Holder, remove the wrapper. Note: • Dispose the depleted Master Roll according to the disposal rule of your local community. )p.74 7 Install a new Master Roll. Remove the shrink package (transparent film) from the new Master Roll, and place the roll so that the mark on the master core comes to the left.
ORCH_GB.book Page 72 Thursday, February 19, 2004 2:08 PM Replacing and Disposing Consumables Tip: • If you cannot insert the leading edge of the master well, use the following procedure: 1) Raise the Master Guide Flap. Turn the wheel beside the Master Guide Flap inward to raise the Master Guide Flap. 2) Pull out the Master Roll up to the line indicated by the arrows. Lower the Master Guide Flap to the original position. 3) 10 Return the units to the original positions.
ORCH_GB.book Page 73 Thursday, February 19, 2004 2:08 PM Replacing and Disposing Consumables Emptying the Master Disposal Box 1 Pull out the Master Disposal Box. Grasp the handle of the Master Disposal Box and pull out the box to the left. 2 Discard the ejected masters. 3 Place the Master Disposal Box into position. Insert the Master Disposal Box until it stops. Note: • Dispose the ejected masters according to the disposal rule of your local community. )p.
ORCH_GB.book Page 74 Thursday, February 19, 2004 2:08 PM Replacing and Disposing Consumables Disposal of Depleted Consumables Dispose the depleted Ink Cartridges, Master Rolls and ejected masters according to the regulations in your local community. If required, separate the specific components using the following procedures to dispose them properly. Ink Cartridge Remove the label (metal included) at the arrow from the outlet surface of the Ink Cartridge, and then dispose them separately.
ORCH_GB.book Page 75 Thursday, February 19, 2004 2:08 PM Replacing and Disposing Consumables Removing and Installing the Print Drum When replacing with a colour drum or dealing with paper jams, remove the Print Drum, take a necessary procedure, and then install the drum. Important!: • Make sure to place and keep the removed Print Drum horizontal. • Make sure to place the replaced Print Drum in the drum case and keep it horizontal. 1 Open the Front Cover. 3 Pull out the Print Drum.
ORCH_GB.book Page 76 Thursday, February 19, 2004 2:08 PM Replacing and Disposing Consumables 5 Install the Print Drum. Align the mark with the mark on the guide and position the Print Drum horizontal relative to the guide. Note: • If you manually rotate the Print Drum, make sure to rotate it so that the and marks meet shown as below after the installation. 6 Return the units to the original positions. Place the Print Drum into position, and then close the Front Cover.
ORCH_GB.
ORCH_GB.book Page 78 Thursday, February 19, 2004 2:08 PM Cleaning Safety Guide - Cleaning This section describes the precautions to be observed when cleaning the machine. Read this section before cleaning the machine. AWARNING: • Before cleaning any part of the machine, turn off the power. • Do not remove any fixed covers. • Contact your service representative immediately if you suspect any dangerous situations or have questions or problems with the machine.
ORCH_GB.book Page 79 Thursday, February 19, 2004 2:08 PM Cleaning Cleaning Thermal Print Head Clean the Thermal Print Head each time you replace the Master Roll. Open the Master Making Unit Cover, and then gently wipe the Thermal Print Head in the back of the unit several times with a soft cloth or tissue. BCaution: • Since the Thermal Print Head is very delicate, avoid shocks or scratches with a hard object.
ORCH_GB.book Page 80 Thursday, February 19, 2004 2:08 PM Cleaning Pressure Roller If the Pressure Roller, which presses print paper against the Print Drum, is stained, smudged strips may appear on the back of copies. If this happens, gently wipe the Pressure Roller with a soft cloth dampened with alcohol. BCaution: • When putting your hand into the unit, do not touch the paper separation hook. The sharp tip of the hook can hurt your hand.
ORCH_GB.book Page 81 Thursday, February 19, 2004 2:08 PM Cleaning Scanner Glass and White Sheet of the ADF unit (Option) Gently wipe the Scanner Glass (for RZ2XX, unavailable), and the White Sheet several times with a soft cloth or tissue. BCaution: • Since the Platen Glass is very delicate, avoid shocks or scratches with a hard object. Note: • For more effective cleaning, dampen a soft cloth or tissue with a small amount of alcohol before wiping the Scanner Glass and White Sheet.
ORCH_GB.book Page 82 Thursday, February 19, 2004 2:08 PM Troubleshooting Check & Error Display When an error occurs on the machine or when consumables or other sections are not yet ready, the Check & Error Display shows error locations and numbers indicating error types. For some errors, error numbers are shown on the Error Number Display (Print Quantity Display). Checking with the Check & Error Display Besides indicators that show error types, numbers that show error locations light.
ORCH_GB.book Page 83 Thursday, February 19, 2004 2:08 PM Troubleshooting When the indicator [Area *3] blinks Check error locations and error numbers (Error Number Display) and take the following procedures: Location No. Error No. Cause Action A-06 Any obstacle exists under the Paper Feed Tray or on paper. Check if any obstacle exists under the Paper Feed Tray or on paper. If an obstacle exists, remove it. A master has not been correctly wrapped around the Print Drum. 1) Pull out the Print Drum.
ORCH_GB.book Page 84 Thursday, February 19, 2004 2:08 PM Troubleshooting Location No. Error No. Cause A master has not been correctly wrapped around the Print Drum. BCaution: A master has not been sent to the Master Disposal Box. 1) Pull out the Print Drum and remove the A-02 A-04 A-16 Action • The Print Drum is equipped with many metallic components. Touch the Print Drum only when necessary. These components may cut your fingers.
ORCH_GB.book Page 85 Thursday, February 19, 2004 2:08 PM Troubleshooting Location No. Error No. A-01 A-34 Cause Action A master has not been correctly set. Open the Master Making Unit Cover, remove the master roll, and set the master correctly. If the master is loose, turn the right flange inward to correct it, and close the Master Making Unit Cover. )p.70 A master has not been correctly cut. 1) Remove the master roll and close the Master Making Unit Cover. A-17 2) Set the master again. )p.
ORCH_GB.book Page 86 Thursday, February 19, 2004 2:08 PM Troubleshooting Location No. Error No. J-02 J-01 86 Check & Error Display Cause Action A paper jam has occurred on the Paper Receiving Tray section. Remove the paper jammed on the Paper Receiving Tray section. If the error indications do not disappear, press the key. A paper jam has occurred in the ADF unit (option). Remove the original jammed in the ADF unit.
ORCH_GB.book Page 87 Thursday, February 19, 2004 2:08 PM Troubleshooting When the indicator [Area *3] blinks Check error locations and error numbers (Error Number Display) and take the following procedures. If an error number is not shown, press the [ ] key. Location No. Error No. c-04 Cause Action The tray has run out of paper. Place paper on the Paper Feed Tray. Custom-size paper has been placed on the Paper Feed Tray at the time of 2-Up printing.
ORCH_GB.book Page 88 Thursday, February 19, 2004 2:08 PM Troubleshooting Location No. Error No. Cause A master has not been wrapped around the Print Drum. Place an original and start with the mastermaking process. If you leave the machine without a master wrapped around the Print Drum, malfunction may occur. Press the key, and then press the key. Or perform master-making operation to wrap a master around the drum.
ORCH_GB.book Page 89 Thursday, February 19, 2004 2:08 PM Troubleshooting Location No. Error No. Cause b-22 Power to the Job Separator (option) is off. Turn on the power to the Job Separator. b-23 The Job Separator (option) has run out of tape. Set new tape to the Job Separator. b-24 A tape jam has occurred in the Job Separator (option). Check the Job Separator and remove the jammed tape. Data send to the Linked Printer (option) has failed.
ORCH_GB.book Page 90 Thursday, February 19, 2004 2:08 PM Troubleshooting When the indicator [*2] is off and “H” is shown on the Print Quantity Display [*4]. In order to assure optimum printing, the machine acquires information from the consumables. If acquired matching information is not proper, “H” is shown on the Print Quantity Display. Enter an appropriate parameter. Entering an inappropriate parameter does not affect usual operations but may result in bad print quality.
ORCH_GB.book Page 91 Thursday, February 19, 2004 2:08 PM Troubleshooting Use the following procedure to enter necessary information. 1 Enter a parameter using the Print Quantity keys. 2 The parameters that can be entered differ among the consumables. Press the ting. key to complete the set- If the next H No. appears, repeat steps 1 and 2. Note: • When necessary entry is completed, the Print Quantity Display restores the normal status and is available for usual operations.
ORCH_GB.book Page 92 Thursday, February 19, 2004 2:08 PM Troubleshooting Troubleshooting Tips If any problems occur during printing, check the following items and take appropriate procedures before calling your authorized service representative. Problem The machine does not start when the power switch is pressed. 92 Cause Action The power was turned off without notice of the Sleep status. • Check the indicator on the control panel and turn on the machine.
ORCH_GB.book Page 93 Thursday, February 19, 2004 2:08 PM Troubleshooting Problem An error indication does not disappear even though consumables (ink, master roll) are set. Cause The consumables (ink, master roll) have not been correctly set. Action After inserting the Ink Cartridge, turn it clockwise ( ) to lock. Or set the Ink Cartridge again. )p.68 Set a master roll so that the mark comes to the left, and set the Master Making Unit. )p.70 The Ink Cartridge does not contain ink information.
ORCH_GB.book Page 94 Thursday, February 19, 2004 2:08 PM Troubleshooting Problem Cause Action Custom-size paper has been placed on the Paper Feed Tray. The Book shadow editing does not allow custom-size paper to be used. Set standard-size paper. Custom-size book or magazine was placed as an original.
ORCH_GB.book Page 95 Thursday, February 19, 2004 2:08 PM Troubleshooting Problem The edges of printed copies are smudged with ink. Cause Action Larger size of paper than the original was placed on the Paper Feed Tray at the time of the master-making process. Because a master was made according to a larger size than the original, the edges of the original were processed as shadows. Set the same size of paper as the original and perform the master-making operation again.
ORCH_GB.book Page 96 Thursday, February 19, 2004 2:08 PM Troubleshooting Problem Cause Paper sticks to the surface of the The margin at the top of the original Print Drum. or print is too small. (The indicator blinks frequently.) 96 Action The margin of the original (top of the print in the paper output direction) must be 5 mm at least. Lower the vertical print position. If this adjustment is impossible, reproduce an original with enough margin and perform the master-making operation again.
ORCH_GB.book Page 97 Thursday, February 19, 2004 2:08 PM Troubleshooting Problem Paper is not smoothly fed from the Paper Feed Tray. (No paper is fed.) Cause Action The position of the Paper Feed Pressure Adjustment Lever was inappropriate. For thick or smooth-surface paper, set the Paper Feed Pressure Adjustment Lever to “ ”. )p.19 The angle of the Stripper Plate is inappropriate.
ORCH_GB.book Page 98 Thursday, February 19, 2004 2:08 PM Troubleshooting Problem Cause Action The indicator lights even when a paper jam has not occurred. Lifted paper was ejected at the time of the second rotation of the Print Drum. Check the printed copies, and if the top margin is less than 5 mm, slightly lower the print position. Because sunlight was projected to the machine, the sensor did not function correctly.
ORCH_GB.
ORCH_GB.book Page 100 Thursday, February 19, 2004 2:08 PM Appendixes Optional Accessories A variety of optional accessories are available to enhance the capabilities of the machine. For details about the optional accessories, see their respective user's manuals. z Colour Drum A variety of colours are available, such as blue, red, green, and brown. Store a drum in its own case. z Auto Document Feeder AF-V Feeds up to 50 sheets of originals automatically.
ORCH_GB.book Page 101 Thursday, February 19, 2004 2:08 PM Appendixes Specifications RISO RZ370 Master-making/printing methods High-speed digital master-making/full automatic stencil printing Original Type Book (10 kg or less), sheet Original Size (max./min.
ORCH_GB.book Page 102 Thursday, February 19, 2004 2:08 PM Appendixes RISO RZ300 Master-making/printing methods High-speed digital master-making/full automatic stencil printing Original Type Book (10 kg or less), sheet Original Size (max./min.
ORCH_GB.book Page 103 Thursday, February 19, 2004 2:08 PM Appendixes RISO RZ230 Master-making/printing methods High-speed digital master-making/full automatic stencil printing Original Type Book (10 kg or less), sheet Original Size (max./min.
ORCH_GB.book Page 104 Thursday, February 19, 2004 2:08 PM Appendixes RISO RZ200 Master-making/printing methods High-speed digital master-making/full automatic stencil printing Original Type Book (10 kg or less), sheet Original Size (max./min.
ORCH_GB.
ORCH_GB.book Page 106 Thursday, February 19, 2004 2:08 PM Index Symbols * Key ......................................................................... 8 + Key ........................................................................ 9 × Key ........................................................................ 9 Numerics 1:1 Key .............................................................10, 35 2-Up Indicator ..................................................10, 41 2-Up Key ............................
ORCH_GB.book Page 107 Thursday, February 19, 2004 2:08 PM Index Ink Cartridge Replacement ................................... 68 Ink Handling ........................................................... 25 Ink Saving .............................................................. 44 Ink Saving Indicator .........................................10, 44 Ink Saving Key .................................................10, 44 Installation ..............................................................
ORCH_GB.book Page 108 Thursday, February 19, 2004 2:08 PM Index R Receiving Tray Paper Guide .............................7, 21 Reduction ............................................................... 35 Replace Ink Cartridge Indicator ......................82, 89 Replace Master Roll Indicator ..................70, 82, 89 Reproduction Size Selection Key .............10, 35, 36 Reservation Period ..........................................30, 61 Reset Key ...................................................
