User`s guide

Preface
Specifications
5
Connecting to a network
When connecting your printer to the network, bear in mind that cables used and configuration methods will differ
according to your network environment. Before you start configuration of your settings, double-check your network
environment.
Important!:
• Always use a commercially available STP (Shielded Twisted Pair) Ethernet cable.
1
Turn off the main power switch of
your RISO printer.
2
Plug a connector of an Ethernet
cable into the Ethernet port on the
RISO Network Card (in your RISO
printer).
3
Connect the other end of the cable to
a desired network terminal, such as
a network hub.
4
Turn on the main power switch of
your RISO printer.
Check that the LINK indicator on the network hub
terminal and the LNK/ACT indicator on the printer
interface terminal light up.