User`s guide

Troubleshooting Tips
<Column> How to initialize the communication settings
58
<Column> How to initialize the
communication settings
Through initializing operation on the operation panel of the printer, you can initialize the current settings of the net-
work to return them to the default settings at factory shipment.
Important!:
• This operation clears the current network configuration of the RISO Network Card. Be sure to confirm in advance
that this operation causes no problems to your network.
Note:
• When the administrator setting has been registered in the authentication setting of the printer, the administrator
authentication is required.
Regarding the authentication setting, refer to the instruction manual of the printer.
In the case of LCD panel machine:
1
Touch [Admin.] on the basic screen.
2
Touch [OK].
3
Touch [Initialize Network] on the list
of environment settings.
4
Touch [OK].
After "Please Wait a Moment" is displayed, when
the initialization is completed, the screen will
return to the list of environment settings.
5
Touch [Exit].
The screen will return to the basic screen.
In the case of LED panel machine:
1
Press the [ ] key to display the
lamp.
2
Enter "73" by using the number
keys.
3
Press the [+] key.
4
Press the [ ] key.
When the initialization is completed, the screen
will return to the normal mode.