User`s guide

Preface

Specifications

Important!:

• RISO Network Card software (RISO-ADMIN, RISO-MONITOR, RISO-PRINT and RisoHoldManager) can only be

used in combination with a RISO Printer Driver.

Interface terminal features

The Interface terminal of RISO Network Card is composed of the following parts.

 A LNK/ACT indicator (Green)

Lights up when 10BASE-T or 100BASE-TX is used for data communication.

Blinks while data is being sent or received.

 B Ethernet port

Accepts the RJ45 terminal of the Ethernet cable.

Important!:

• The maximum allowable input voltage of this port is

3.5V.

Available input port: Ethernet: IEEE802.3(10Base-T), IEEE802.3u(100Base-TX)

Applicable OS: Windows 2000 Professional, Windows 2000 Server, Windows XP Home

Edition, Windows XP Professional, Windows Server 2003, Windows Vista

Available network protocol

• TCP/IP (on the network layer): ARP, IP, ICMP

• TCP/IP (on the transport layer) TCP, UDP

• TCP/IP (on the application layer): LPD, FTP, DHCP, SNMP, HTTP, IPP, Raw-Mode Print (TCP#9100)

RISO Configuration Protocol (UDP#19541)

RISO Configuration Protocol (TCP#21075)

LPR/FTP/SNMP Client Functions

Applicable browser: Microsoft Internet Explorer 5.5 and higher