User`s guide

Utility Software Guides
Configuring the RISO printer using an internet browser
23
5
Open a desired network configura-
tion page.
Click on a desired network configuration name in
the top line on the page.
You can check the selected network configuration
of the RISO printer concerned in the opened page
and also change it there if desired. When the net-
work configuration is changed in these pages,
click on the [Submit] button for confirmation.
Then click on [Restart the network interface
card] in the left-hand column to apply the new net-
work configuration to the selected RISO printer.
For explanations of each configuration, see pages
on the relevant tabs in the "[Network Parame-
ters] dialog box".
Note:
• You may need to reboot the selected RISO
printer to apply the new network configuration
to it if it has older system configuration.
• The help window can be opened for the
descriptions about the current network configu-
ration page by clicking on the [Help] button in it.
The detailed descriptions of the respective net-
work configuration pages are also available on
the corresponding pages of this user's guide.