User`s guide

Utility Software Guides

RISO-ADMIN features

[SNMP] tab

The network configuration of a RISO printer which is required for the SNMP administrative tool can be specified here.

1) Authentic Community

The computer which belongs to this community only can

view the MIB-II parameters of a RISO printer specified

here. Up to 15 characters are available for this commu-

nity name.

2) TRAP Community

This community name is used when a RISO printer

sends a TRAP signal to a specified address. Up to 15

characters are available for this community name.

3) TRAP Address

This is the IP address of the location where TRAP sig-

nals are to be sent. When [0.0.0.0] is specified here, no

TRAP signal will be sent from a RISO printer.

4) MIB-II parameters

• SysContact

The mail address (up to 255 characters) of your sys-

tem administrator will normally be entered here.

• SysName

The host name or domain name (up to 255 charac-

ters) of a RISO printer will normally be entered here.

• SysLocation

The location (up to 255 characters) of a RISO printer

will normally be entered here.

• DefaultTTL

This indicates the allowable existence time of IP pack-

ets. Leave this value as it is (255).

• Enable Authen Trap

If this check box is selected, a TRAP signal will be

sent to the specified TRAP address whenever an

unauthorized computer tries to view the MIB-II param-

eters of a RISO printer.