User`s guide

Utility Software Guides

RISO-ADMIN features

[Network Parameters] dialog box

Common buttons on the tabs

• [Setup] button

Sends settings to the network interface card. Changes to the network interface card will take place after restart.

• [Cancel] button

Cancels the settings and goes back to the previous state.

• [Initialize] button

Initializes the network interface card to restore the factory-set (default) network configuration in the selected RISO

printer.

Note:

• The network interface card can also be initialized from the operation panel on the printer. ()p.58)

[General] tab

The password which will be requested to use RISO-ADMIN or to open the RISO printer network configuration web

page in the Internet browser can be specified here.

1) [Change root password] button

Opens the entry box of the password. You can use up to

7 ASCII characters for the password.

2) Printer Name

Set the name for the "Printer Name" in the RISO-ADMIN

main window.

If more than one printer is used, set a name suitable for

each printer.

Important!:

• Do not leave the Printer Name column blank.

3) LAN Interface

You can specify the physical network type in this box.

Leave "AUTO" selected in most cases.