User`s guide

System Configuration
Assigning an IP address to the RISO printer
10
6
Double-click a desired RISO printer
in the displayed list box.
Highlight the corresponding line to select it. The
Ethernet address of the selected RISO printer will
then be displayed in the corresponding field
above.
Note:
• When no IP address is assigned to a RISO
printer yet, [0.0.0.0] is shown in the [IP
Address] column in the list box.
7
Click on the [Yes] button and specify
an IP address.
Enter the IP address into the corresponding boxes
in the displayed window.
8
Confirm the specified IP address is
correct and click on the [OK] button.
The reserved IP address is assigned to the
selected RISO printer. When the prompt appears
asking whether you wish to restart your network
interface card, click on the [Yes] button.
Important!:
• Depending on the model of your RISO printer,
you may have to restart the printer by turning it
off and then on again. Follow the instructions on
the main control panel of the printer.
• It is not necessary to reboot your computer.