User`s guide

78
Appendix
Problem
Graphics cannot be printed properly.
Images are reduced unexpectedly.
Some fonts cannot be printed properly.
The page image is not centered or is
clipped at an edge.
Cause / Condition and Action
❑ The current [RISO...] printer driver was not selected as
active when editing graphics.
Action
Select the current [RISO...] Printer Driver and edit
graphics again because graphics may not be printed
properly if they are edited with another Printer Driver
selected.
❑ The specified custom paper size was so large that unex-
pected margins were assigned on a page.
Action
Select another paper size or specify the custom paper
size within the valid range.
❑ Do you use the Printer Driver corresponding to your RISO
printer?
Action
If the name of your RISO printer is different from the
model name of your Printer Driver, the document data
cannot be printed out correctly.
❑ The [Use Printer Font] option is selected in the application
software.
Action
Cancel the [Use Printer Font] option in the application
software.
❑ The paper size setting in the application software is not
identical with that in the Printer Driver.
Action
Make both paper size setting identical.
❑ The print area specified in the application software is beyond
the maximum print area of your RISO printer.
Action
Increase the border margins in the application soft-
ware to contain the page image within the printable
area of your RISO printer.
❑ There is something wrong with the Print cylinder (drum) in
your RISO printer.
Action
Check your RISO printer, referring to the dedicated
user’s guide.
Unexpected Print Result_______________________