User`s guide

75
Appendix
Message
The printer is not ready for printing.
(The device is not ready.)
Cannot print because an error is
found in the current printer settings.
Troubleshooting Tips
Error Message on PC’s Display
Take actions as given below if the following error messages appear in the PC’s display.
Description and Action
❑ This message appears when your RISO printer requires
paper or it is not connected to your computer properly.
Action
Replenish paper or check your RISO printer and the
printer cable for poor connection, and then restart
printing.
❑ This message also appears when the memory of your RISO
printer becomes full during data transmission because the
size of the document data concerned is too large.
Action
Reduce the file size of the document data concerned
or increase the value of the [Timeout] setting in your
computer system, and then restart printing.
❑ This message appears if the printer settings (paper size,
print orientation, etc.) in the application software and the
Printer Driver do not match.
Action
Change the printer settings in the application software
to make them identical with those in the Printer Driver
or vice versa.