User`s guide

Manual installation

Manually installing / uninstalling the Printer Driver

Open the printer folder, and open the properties of the printer to

which the Printer Driver has been installed.

Click [Print processor] of the [Details] tab.

Select [R34V8AP] from the list of print processors and [NT EMF

1.008] from the list of default data types, and click [OK].

Print the test page.

In the case of network connection /

USB Flash Drive output

Start [Add Printer Wizard].

Select [Local printer], and click [Next].

Create the port.

In the case of network connection:

Create TCP/IP port or LPR port.

In the case of USB Flash Drive output:

Create the local port (C: \RISO\RISORINC.prn, etc.).

IMPORTANT!

You cannot create the local port in the route of the startup drive.

Create any folder, and then create the local port in the folder.

Click [Have Disk], and select the inf file of the driver to install.

In the case of network connection:

[RISO Printer Driver]-[WinVista]-[English]-RISODRV. inf

In the case of USB Flash Drive output:

[RISO Printer Driver]-[WinVista]-[English]-[USB flash]-RISODRV. inf

Select the printer in use, and click [Next].

In the case of network connection, print the test page.

Restart your computer.