User`s guide

Manual installation

Manually installing / uninstalling the Printer Driver

■ Manual installation

IMPORTANT!

• To install the Printer Driver, it is necessary to log on to Windows by the account with

the authority to change the system setting (administrator, etc.).

• To operate this Printer Driver, the following environment is required.

Memory: For Windows 2000 ....... 128MB or larger

For Windows XP .......... 192MB or larger

• Server OS and printer sharing are not supported.

In the case of connection via USB cable

Turn the power of the printer on, and connect the USB cable to the

printer.

Start your computer, and insert the "RISO Printer Driver" CD-ROM

into your computer.

Connect the USB cable to your computer.

Install the Printer Driver according to the instructions on the [Found

New Hardware Wizard] window.

1 Select [Install from a list or specified location], and [Don't search. I will

choose the driver to install.], and then click [Next]. (For Windows XP)

Select the [Display a list of known drivers for this device so that I can choose

a specific driver], and then click [Next]. (For Windows 2000)

2 Click [Have Disk], and select the inf file of the driver to install.

3 Select the printer in use, and click [Next].

4 Complete the Wizard window.

Restart your computer.

Open the printer folder, and open the properties of the printer to

which the Printer Driver has been installed.

For Windows 2000 / XP