User`s guide

Creating a RISORINC-format file
60
Working with the Priter Driver
■ Creating a RISORINC-format file
It is necessary to create a RISORINC-format file before sending data via
FTP with RISO Network Card.
A RISORINC-format file can only be used with RISO printers.
All settings made in the Printer Driver are saved with the file.
IMPORTANT!
The procedure for creating RISORINC files differs when using the [Layout]
feature (Page 48). See "Creating RISORINC Files Using the Layout function"
(Page 62).
Open a document file and specify the print job in the [Print]
dialog box.
Select [Print] in the [File] menu to open the [Print] dialog box.
Confirm that [RISO...] is selected in the [Printer] field in the
[Print] dialog box.
The selected [RISO...] should correspond to the RISO printer model to which
your document file is to be transmitted. Otherwise, the transmitted docu-
ment data may not be printed out correctly on the target RISO printer.
IMPORTANT!
• The RISORINC-type file should be created with the RISO Printer Driver corre-
sponding to your RISO printer. If the Printer Driver does not correspond to
your RISO Printer Driver, the transmitted document may not be printed out
correctly.
• USB flash-via-Printer Driver cannot be used.