User`s guide

58
Working with the Priter Driver
Setting and Printing Conditions
Job separator
You can activate the job separator on your RISO printer and select the tim-
ing of separation tape insertion.
<Open> : Follow the present setting of your RISO printer.
OFF : No separation tape inserted.
ON-Between Documents : Insert separation tapes per job.
ON-Between Pages : Insert separation tapes per page.
For the features and operations of the Job Separator, refer to the User’s
Guide of the Job Separator.
22
22
2 Print speed You can select the print speed of your RISO printer. Click on the [▼] bar and
select a desired speed level from the displayed list. 5 levels of print speed
are available. The factory-set speed level is “<Open>”, which lets your RISO
printer operate at the speed level as specified on its own control panel.
33
33
3 Print density You can select the print density on your RISO printer. Click on the [▼] bar
and select a desired density level from the displayed list. The factory-set
density level is “<Open>”, which lets your RISO printer print at the density
level as specified on its own control panel.
44
44
4 Your RISO printer is initialized before receiving print data when this check
box is selected. It is recommended to select this check box in most cases.
55
55
5 Interval printing By allowing the printer to skip a paper feeding during printing, the ink has
time to dry, preventing it from leaving marks on the back of the next sheet.
66
66
6 The ink saving function of the printer is activated when this check box is
selected. The volume of ink used for printing will be reduced compared
with normal operation.
In case of selecting "Ink saving mode" printing image might be lighter or
erased depending on darkness of the original image.
77
77
7 You can prevent your confidential documents from being duplicated without
your knowledge by selecting this check box. When this check box is
selected, the remaining master is automatically replaced with a blank one
after all specified print jobs are finished.
Output the data
after initializing
printer
Ink saving
Activate the
Confidential
mode after job
completes