User`s guide

41
Working with the Printer Driver
Changing the Printer Driver Configuration
Color Information (Network Connection only)
Make your choice for auto detection of color information.
Check box selected : Detection of the color information of the print
color mounted on the printer is made every time
you open the printer’s properties to reflect the in
formation on the [Color Label] for the Printer
Driver.
For printing process without opening the printer’s
properties, detection of color information is made
prior to printing process, and the data is output
with the print color mounted on the printer by
tem porarily reflecting the printer drive settings.
Check box not selected: Color information is updated only when you click
[Refresh] of the [Guide] tab.
Reference
You need to make an entry for this field when detection is made for the color
(colour) information of the cylinder (drum) mounted on the printer.
IP Address
Enter the IP address of your RISO printer which is connected.
Click [OK].
The new Printer Driver configuration is confirmed and the [Properties] dialog
box is closed.