User`s guide

USB Flash Drive Output

Installing the Printer Driver

■ USB Flash Drive Output (only for EZ5 series)

About USB Flash Drive

● Use USB Flash Drive of mass storage class. Depending on the type of

USB Flash Drive, the Printer Driver may not work properly.

● When connecting or removing USB Flash Drive, insert it or pull it out

slowly by using the correct method.

● When USB Flash Drive data is damaged by natural disaster or contin-

gency, the data saved in the USB Flash Drive cannot be guaranteed. It is

recommended to back up important data with your computer with which

the data has been created.

Installing the USB flash-via-Printer Driver

This section describes how to install the USB flash-via-Printer Driver when

using a USB Flash Drive to print.

(Regarding the procedure for manual installation, see page 67.)

IMPORTANT!

• You are required to have the administrator’s privilege to install the Printer Driver

program in your computer.

• RISO Printer Driver system requirements:

For Windows 2000 ........128MB of RAM or more

For Windows XP ...........192MB of RAM or more

For Windows Vista ........512MB of RAM or more

• This Printer Driver does not support server OS or printer sharing.

Insert the [RISO Printer Driver] CD-ROM into your computer's

CD-ROM drive.

The installer is started. When the installer is not started, double-click the

“SETUP.EXE” file in CD-ROM.

If the [User Account Control] dialog appears, click on [Allow]. (For

Windows Vista)