Specifications

Troubleshooting
Check & Error Display
71
The (LOW INK CARTRIDGE) Indicator
When the indicator brinks:
The remaining ink quantity is small (10% or less). Prepare a new Ink Cartridge.
When the indicator lights:
Because the entire ink has been consumed, set a new ink cartridge.
)p.50
The (LOW MASTER ROLL) Indicator
When the indicator brinks:
The remaining master quantity is small (10% or less). Prepare a new master.
When the indicator lights:
Because the entire master roll has been consumed, set a new master roll.
)p.52
When the (EMPTY DISPOSAL BOX) Indicator lights
Because the Master Disposal Box is full, remove the box and discard the ejected masters.
)p.54
When the (CALL SERVICE) Indicator lights
Check error numbers shown on the Error Number Display and contact your dealer or authorized service represent-
ative.
When the indicator is off and “H” is shown on the Print Quantity Display.
In order to assure optimum printing, the machine acquires information from the consumables.
If acquired matching information is not proper, “H” is shown on the Print Quantity Display. Enter an appropriate
parameter.
Entering an inappropriate parameter does not affect usual operations but may result in bad print quality.
The table shows the “H” numbers to be shown on the Print Quantity Display and the selectable parameters.
Note:
• When you set the power switch OFF and set the swich ON again, entered H No's information disappears and thus
you need to enter H No's again.
• If you are not sure the best setting for master-making density, we may suggest you start from 1(default setting) and
adjust if necessary based on the result of print.
H No. Description Parameter
H1
Ink color (colour) setting
Select the same color (colour) as the currently used for
Print Drum (Cylinder).
1: black
H4
Master-making density setting
Set the reference density for the master-making
process.
1 (light) - 10 (dark)
KZ30_UG.book Page 71 Monday, December 21, 2009 11:11 AM